Home Assistant Yellow integrates 1,000+ different devices and services, allowing you to create powerful automations and get insight into your energy usage. All from an easy-to-use interface that runs 100% locally without anything in the cloud. The KNX integration for Home Assistant allows you to connect to KNX/IP devices. The integration requires a local KNX/IP interface or router. Through this, it will establish a connection between Home Assistant and your KNX bus. There is currently support for the following device types within Home Assistant: Binary sensor Button Climate Cover Date Fan Light Notify Number Scene Select Sensor Switch Text Time Weather Home Assistant Yellow grows with you. A home is not static. As we grow as a person or expand our family, our homes evolve. What we buy today, should work tomorrow. With Home Assistant Yellow we have created a system that can be upgraded so it can keep up as you grow. At the heart of Home Assistant Yellow is the Raspberry Pi Compute Module 4. This plugs into the Home Assistant Yellow board and provides the brains. You can upgrade to a more powerful version of the Compute Module 4 at any time. Home Assistant Yellow includes the latest and greatest Zigbee radio chip from Silicon Labs to communicate with smart devices in your home. The chip is forward-compatible with the upcoming Matter smart home connectivity standard, in which Silicon Labs is heavily involved. Home Assistant Yellow will be compatible with Matter as soon as the Silicon Labs Matter SDK is released.Home Assistant Yellow also contains an M.2 extension port. This allows you to easily plug in an NVMe SSD drive to extend the available space. SPECIFICATIONS Carrier board for Raspberry Pi Compute Module 4 (CM4) CM4 board-to-board connector Supports direct boot from NVMe devices (e.g., for CM4 Lite) 12 cm x 12 cm Compatible with all 32 variants of CM4 Quad-core Cortex-A72 (ARMv8) 64-bit / 1.5 GHz Up to 8 GB RAM Up to 32 GB eMMC for CM4 Regulatory approval does not cover wireless variants Integrated smart-home wireless (Silicon Labs MGM210P Mighty Gecko Module) Supports Zigbee 3.0, OpenThread, and Matter 2.4 GHz radio with TX power up to +20 dBm 1024 KB flash program memory, 96 KB RAM data memory Pre-installed with Zigbee 3.0 firmware (EZSP), can be upgraded Expansion slot For NVMe SSDs (M-Key) M.2 socket M-Key Supports 2230, 2242, 2260, and 2280 modules PCIe x1 Note: Google Coral AI Accelerator not working, details in this issue. Networking Gigabit Ethernet USB Ports 2 x USB 2.0 Type-A host port 1 x USB-C 2.0 device port (Silicon Labs CP2102N USBXpress USB bridge) UART mode (default): debug USB-to-serial adapter USB mode: CM4 USB 2.0 interface for USB recovery Audio High-quality stereo audio DAC 2 V RMS line-out on 3.5 mm audio jack SNR 106 dB Buttons 2 x Push button Red: Factory reset Blue: To be determined RTC RTC backed by CR2032 battery Status LEDs Green: Power Red: Disk usage Yellow: Home Assistant system state Power 12 V / 2 A through barrel DC power jack (5.5 mm x 2.1 mm) Typical power usage Idle ~1.5 W Idle with NVMe ~2.5 W Load ~5-9 W Enclosure 123 mm x 123 mm x 36 mm Translucent injection-molded polycarbonate plastic Tool-free assembly Accommodates custom heat sink (included)
