Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Body Material: Mahogany Type: Solid Cutaway: Single Binding: None Top Veneer: None Neck Material: Maple Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75" Binding: None Fretboard Material: Ebony Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 4 Knobs, Toggle Switch Wiring: DIY (soldering required) Output Jack: Side jack Hardware Bridge: Adjustable Bridge + Stopbar Tuners: Gold Sealed Pickguard: None Knobs: Chrome Cavity Covers: Black Strings: Steel Finish: Gold What's in the Box Solid wood body routed for two humbuckers, four pots, a toggle switch and a jack Neck with dark fretboard, frets and green abalone block inlays 6x gold sealed tuners with bushings and washers 2x black humbucker pickups Pre-wired harness with four pots and coloured wiring Gold toggle switch with black tip Gold square jack plate with output jack Gold adjustable bridge with six saddles Gold stop bar tailpiece 4x gold posts and thumbwheels for bridge and tailpiece 4x chrome dome knobs Black rear control cavity cover Black round jack cavity cover Black truss rod cover Allen wrench Coiled set of strings Assorted gold screws, nuts and washers Guitar cable What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related