Houzer NVS-5200 Novus 32-Inch Dual-Level Undermount Workstation Sink Brand: Houzer | SKU: NVS-5200 Product Overview The Houzer NVS-5200 Novus is a 32-inch undermount single-bowl workstation sink with two accessory levels that allow food preparation, rinsing, draining, and cleanup to take place directly over the bowl. Its sliding-platform system supports the included cutting board, roll-up mat, and drying tray at different working heights, helping preserve surrounding counter space while keeping prep mess and water over the sink. The large open basin remains available for cookware and daily cleanup when the accessories are removed or repositioned. Houzer fabricates the sink from 18-gauge T-304 stainless steel with a satin finish and 10 mm bowl corners. Full-underside insulation and sound-deadening material help reduce water noise, dish clatter, vibration, and condensation. The rear-set standard drain leaves more usable space toward the center and front of the bowl and can help keep plumbing closer to the cabinet wall. Houzer specifies a minimum 36-inch sink base. The overall sink measures approximately 31-9/16 inches long by 17-13/16 inches wide and 9 inches deep. Houzer’s current product listing describes a 30-by-16-1/4-inch upper inner opening, while the dual-level specification drawing shows an approximately 14-1/4-inch lower basin width between the ledges. The package includes a cutting board, multipurpose roll-up mat, drying tray, bottom grid, basket strainer, mounting hardware, template, and instructions. Confirm accessory clearances, faucet reach, drain routing, reveal style, and support before fabrication. Key Features: Dual-level undermount workstation design Large single-bowl configuration 18-gauge T-304 stainless steel Satin finish with 10 mm bowl corners Rear-set 3-1/2-inch drain opening Full-underside sound and condensation insulation Complete preparation and draining accessory set Designed for a 36-inch minimum sink base Common Uses: Main kitchen food-preparation and cleanup station Working over the bowl where counter space is limited Rinsing produce and draining dishes on sliding accessories Large single-bowl workstation renovations Technical Specifications: Manufacturer model / Shopify SKU: NVS-5200 Series: Novus Installation type: Undermount Bowl configuration: Large single bowl with dual accessory ledges Material: T-304 stainless steel Gauge: 18 gauge Finish: Satin Corner radius: 10 mm Overall dimensions: Approximately 31-9/16 inches x 17-13/16 inches x 9 inches Upper inner opening: Approximately 30 inches x 16-1/4 inches x 9 inches Lower basin width shown in specification drawing: Approximately 14-1/4 inches Drain location: Rear Drain opening: 3-1/2 inches Minimum cabinet size: 36 inches Certifications listed by Houzer: ASME 100.19.3-2000, UPC, and CSA What's Included: Cutting board Multipurpose roll-up mat Drying tray Stainless steel bottom grid Basket strainer Mounting hardware, cutout template, and installation instructions Compatibility and Installation Notes: Use the actual sink and current Houzer template before cutting the countertop. Confirm the selected reveal, cabinet support, faucet reach across both accessory levels, rear-drain plumbing, disposal clearance, and storage below the sink. Replacement accessories must be identified for NVS-5200 because workstation ledge dimensions are model-specific. FAQ Is NVS-5200 a double-bowl sink? No. It is one large single bowl with two sliding accessory levels. What accessories are included? The package includes a cutting board, roll-up mat, drying tray, bottom grid, basket strainer, mounting hardware, template, and instructions. What cabinet size is required? Houzer specifies a minimum 36-inch sink base. Does NVS-5200 have zero-radius corners? No. Houzer’s current specification identifies 10 mm bowl corners. Why Buy the Houzer NVS-5200 From Big Frog Supply? Big Frog Supply identifies the exact dual-level workstation configuration, full included accessory set, 10 mm corner specification, upper and lower bowl measurements, rear drain, cabinet requirement, and manufacturer documents so customers can plan the sink, faucet, and countertop opening accurately. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Is NVS-5200 a double-bowl sink?", "acceptedAnswer": { "@type": "Answer", "text": "No. It is one large single bowl with two sliding accessory levels." } }, { "@type": "Question", "name": "What accessories are included?", "acceptedAnswer": { "@type": "Answer", "text": "The package includes a cutting board, roll-up mat, drying tray, bottom grid, basket strainer, mounting hardware, template, and instructions." } }, { "@type": "Question", "name": "What cabinet size is required?", "acceptedAnswer": { "@type": "Answer", "text": "Houzer specifies a minimum 36-inch sink base." } }, { "@type": "Question", "name": "Does NVS-5200 have zero-radius corners?", "acceptedAnswer": { "@type": "Answer", "text": "No. Houzer’s current specification identifies 10 mm bowl corners." } } ] }
Related
Related
Related
Related