HP CodeMaster XL+ Defibrillator Features The HP Codemaster XL+ defibrillator is a high-performance, high-speed defibrillator and charges from 0 to 360 joules in under 5 seconds, plus it offers a variety of advanced options easily customized to meet the needs of your unit. The CodeMaster XL+ Defibrillator by HP is a flexible choice for high-use areas of the hospital including operating rooms, intensive care units, cardiac care units, and emergency departments, as well as for clinics and ambulatory surgery centers. Battery strength indicator LED light Back-up AC power Documents and stores events Shock advisory option Adjustable heart rate alarms ECG Monitor External Paddles Recorder Alarms and Code Summary Biomedically Inspected Patient Ready HP CodeMaster XL+ Defibrillator Specifications Dimensions and Weight Height: 7.9” (20 cm) Width: 11.8” (30 cm) Depth: 15.6” (39.7 cm) Weight: 24 lbs (10.9 kg) Battery Type: Rechargeable, sealed lead-acid battery 4 Ah, 12 V nominal Charge time: 2 hours to 90% of full capacity 18 hours to 100% capacity Repeated charging to less than 100% will reduce the useful life of the battery Capacity: 2.5 hours monitoring or 50 full-energy discharges or 1 hour monitoring and recording AC input: 100 to 230 VAC ±15%, 50/60 Hz Battery indicators: Illuminated LED indicates battery is charging Low Battery message appears on the monitor Defibrillator Waveform: Damped Sinusoidal Output Energy (Delivered): 2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, and 360 joules Charge Control: Push-button on apex paddle and on front panel Charge Time: Less than 5 seconds to 360 joules with a functional battery installed Paddle Contact Indicator: Shows quality of contact before discharge Charge-done Indicator: Display indicates available energy Charge-done light on apex paddle Charge done tone Synchronizer: SYNC message appears on the monitor and is annoted periodically on the recorder while in synchronous mode An audiblebeep sounds with each detected R-wave, while a marker on the monitor and sync mark on the recorder strip indicate the discharge point Paddles: Standard paddles are anterior/anterior Adult electrodes (83 cm sq) slide off to expose pediatric electrodes (21 cm sq) Paddle cord is 10 feet (3m) Full range of internal paddles available Monitor Input: ECG activity may be viewed through the paddles or patient cable Lead Fault: LEADS OFF message and dashed baseline appear on the monitor if a lead becomes disconnected Common Mode Rejection: Greater than 100 dB measured as per AAMI standards for cardiac monitors Heart Rate Display: Digital read out on monitor from 20 to 280 bpm Event Summary Stores and prints 3 seconds pre-and 8 seconds post-critical event data for up to 28 events Data is retained after unit is turned off Recorder Annotations: Time Date Heart Rate Event Markers ECG Mode Selected Energy Actual Delivered Energy Peak Current Patient Impendence Recorder Mode: Automatically documents events and ECG during defibrillation episodes The recorder can be configured to run in either real time or with a 6-second delay Frequency Response: 0.5 to 40 Hz monitor bandwidth 0.05 to 150 Hz diagnostic bandwidth is selectable