Product Overview The Poly EagleEye IV camera mounting bracket (89L88AA) is the OEM wall and display mount for Poly's HDCI conference room cameras. HP lists it as the mounting bracket for the Poly EagleEye IV 12x camera, the EagleEye IV USB camera, and the Poly Studio E60, which makes it the correct hardware when an EagleEye IV or E60 has to be fixed above or below a room display instead of resting on a shelf. It ships with the fasteners and standoffs the installation requires, so an integrator can complete the camera mount in a single pass. Order it for permanent conference room, boardroom, and training room installs where a loose camera on a display bezel is not acceptable. Product Description Camera mounting is where a modular Poly room system either looks finished or looks temporary. The EagleEye IV and Studio E60 are HDCI cameras designed to pair with a codec rather than to sit on a desk, and both are commonly installed above a display so the lens sits near eye height for seated participants. This bracket is the part HP specifies for that job. Because it is the OEM bracket, the camera's mounting pattern, weight, and cable exit are accounted for, which a universal camera shelf does not guarantee — and a PTZ camera that shifts under its own pan and tilt motion is a support call waiting to happen. The compatibility list is what matters on an accessory like this. HP names the Poly EagleEye IV 12x camera and the EagleEye IV USB camera as the supported cameras, and carries the bracket under a product name that also covers the Poly Studio E60 4K PTZ conference camera. In a typical modular deployment, the camera is driven by a Poly G7500 4K modular codec, and the bracket is the piece that gets the camera off the credenza and onto the wall or display. Systems ordered as a G7500 with EagleEye IV 12x camera kit include the camera but not a wall mount, so the bracket is normally a separate line on the bill of materials. For integrators, the value is predictability across a room standard. Specifying one OEM bracket for every EagleEye IV or E60 position in a building means the mounting height, cable service loop, and sightline are repeatable from room to room, and a technician can be handed a room list rather than a set of one-off mounting instructions. Confirm the exact camera model and the intended orientation against the current HP mounting guide for the camera before ordering, since HDCI camera mounting hardware is model-specific and does not carry across the EagleEye family. Key Features OEM Poly Bracket — Designed by HP for its own HDCI cameras, so the mounting pattern and load path match the camera rather than approximating it. EagleEye IV Compatibility — HP lists support for the Poly EagleEye IV 12x camera and the EagleEye IV USB camera. Studio E60 Support — Carried by HP under a product name covering the Poly Studio E60 HDCI camera, so one bracket serves both generations of the room camera standard. Display and Wall Mounting — Puts the camera at a fixed height near the display instead of leaving it loose on a credenza or bezel. Fasteners Included — Ships with the hardware needed for the install, so the camera mount is a single pass rather than a return trip. Repeatable Room Standard — Specifying one bracket across a campus keeps camera height and sightline consistent from room to room. Supports PTZ Motion — A rigid, camera-specific mount keeps a pan-tilt-zoom camera stable through its full travel. Technical Specifications Manufacturer Part Number 89L88AA Product Type OEM camera mounting bracket Compatibility Poly EagleEye IV 12x camera; Poly EagleEye IV USB camera; Poly Studio E60 (HP product name: Poly Studio E60 EagleEye IV HDCI Camera Mounting Bracket) Mounting Application Wall or room display Included Hardware Bracket with the fasteners and standoffs required for installation Typical Codec Pairing Poly G7500 modular codec and other supported Poly room systems Replaces In-Box Part No — EagleEye IV and Studio E60 cameras are supplied without a wall mount, so this is an add-on line item Brand Poly (HP)
