Overview The Haltech Elite CAN Cable DTM-4 to DTM-4 provides reliable CAN bus communication between your Elite ECU and external devices at 1200mm (48") length. Essential for connecting wideband controllers, dash displays, and additional control modules in larger engine bays where standard cable lengths fall short. Built to Haltech's exacting standards with proper shielding and DTM-4 connectors for secure, interference-free data transmission. Technical Specifications Part Number: HT-130025 Length: 1200mm (48") Connector Type: DTM-4 to DTM-4 Cable Type: Shielded CAN bus cable Wire Gauge: Automotive specification Operating Temperature: -40°C to +125°C Why You Need This CAN bus communication is the backbone of modern engine management systems, carrying critical data between your Elite ECU and peripherals like WB1/WB2 wideband controllers, IC-7/iC-7 displays, and additional I/O expanders. The 1200mm length is particularly valuable in larger applications — think LS swaps into classic muscle cars, RB-powered drift builds, or commercial vehicle conversions where the ECU mount and dash/wideband locations are separated by substantial distances. Standard shorter cables often force compromises in component placement, leading to poor routing, stress on connections, or impossible installations. This extended length cable eliminates those constraints whilst maintaining proper shielding to prevent EMI interference that can cause communication dropouts, false readings, or system instability. The DTM-4 connectors provide the weatherproof, vibration-resistant connection quality that Haltech's Elite system demands — crucial when you're running serious power and need every sensor reading to be accurate. ECU & System Compatibility Compatible with the full Haltech Elite ECU range including Elite 550, 750, 1000, 1500, 2000, and 2500 models. Also suitable for connecting WB1 and WB2 wideband controllers, iC-7 displays, and other CAN-enabled Haltech peripherals. Contact our technical team to confirm fitment for your specific system configuration and component layout. What's in the Box 1x Haltech Elite CAN Cable DTM-4 to DTM-4, 1200mm length Pre-terminated DTM-4 connectors both ends Protective cable sheathing Complete Your Build Most customers running extended CAN installations also require additional system components for complete functionality. Consider pairing with Haltech WB1 or WB2 wideband controllers for accurate air/fuel monitoring, or an iC-7 display for real-time data logging and system monitoring. Our technical team maintains UK stock of all complementary Haltech components and can advise on the complete wiring solution for your specific build requirements.
Related
Related
Related
Related