Human D2D(D-Dimer) ELISA Kit Detection Range 6.25-400 ng/mL Sensitivity 3.75 ng/mL Product Details Properties Assay type Sandwich-ELISA Format 96T Assay time 3.5h Detection range 6.25-400 ng/mL Sensitivity 3.75 ng/mL Sample type &Sample volume plasma; 100μL Specificity This kit recognizes Human D2D in samples. No significant cross-reactivity or interference between Human D2D and analogues was observed. Reproducibility Both intra-CV and inter-CV are < 10%. Application This ELISA kit applies to the in vitro quantitative determination of Human D2D concentrations in plasma. Test Principle This ELISA kit uses the Sandwich-ELISA principle. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to Human D2D. Standards or samples are added to the micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human D2D and Avidin-Horseradish Peroxidase (HRP) conjugate are added successively to each micro plate well and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human D2D, biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by the addition of stop solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The OD value is proportional to the concentration of Human D2D. You can calculate the concentration of Human D2D in the samples by comparing the OD of the samples to the standard curve. Kit Components and Storage An unopened kit can be stored at 2-8℃ for 1 month. If the kit is not supposed to be used within 1 month, store the components separately according to the following conditions once the kit is received. Item Specifications Storage Micro ELISA Plate(Dismountable) 96T: 8 wells ×12 strips48T: 8 wells ×6 strips -20℃, 6 months Reference Standard 96T: 2 vials48T: 1 vial Concentrated Biotinylated Detection Ab (100×) 96T: 1 vial, 120 μL48T: 1 vial, 60 μL Concentrated HRP Conjugate (100×) 96T: 1 vial, 120 μL48T: 1 vial, 60 μL -20℃(Protect from light), 6 months Reference Standard & Sample Diluent 1 vial, 20 mL 2-8°C, 6 months Biotinylated Detection Ab Diluent 1 vial, 14 mL HRP Conjugate Diluent 1 vial, 14 mL Concentrated Wash Buffer (25×) 1 vial, 30 mL Substrate Reagent 1 vial, 10 mL 2-8℃(Protect from light) Stop Solution 1 vial, 10 mL 2-8°C Plate Sealer 5 pieces Manual 1 copy Certificate of Analysis 1 copy Technical Data: Precision Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human D2D were tested 20 times on one plate, respectively.Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human D2D were tested on 3 different plates, 20 replicates in each plate. Intra-assay Precision Inter-assay Precision Sample 1 2 3 1 2 3 n 20 20 20 20 20 20 Mean (ng/mL) 19.12 42.85 134.39 19.20 39.80 143.76 Standard deviation 1.33 2.11 4.26 1.09 2.20 5.15 CV (%) 6.93 4.93 3.17 5.67 5.53 3.58 Recovery The recovery of Human D2D spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices. Sample Type Range (%) Average Recovery (%) EDTA plasma (n=8) 90-105 96 Target Information Research Area Cardiovascular Assay Procedures 1. Add 100μL standard or sample to the wells. Incubate for 90 min at 37°C 2. Discard the liquid, immediately add 100μL Biotinylated Detection Ab working solution to each well. Incubate for 60 min at 37°C 3. Aspirate and wash the plate for 3 times 4. Add 100μL HRP conjugate working solution. Incubate for 30 min at 37°C. Aspirate and wash the plate for 5 times 5. Add 90μL Substrate Reagent. Incubate for 15 min at 37°C 6. Add 50μL Stop Solution 7. Read the plate at 450nm immediately. Calculation of the results
