The Hunter FCT-200 is a Schedule 40, 2" (50 mm) sensor receptacle tee engineered to accept Hunter Flow‑Clik / Flow‑Sync sensors and integrate flow monitoring into mainline irrigation systems. The FCT-200 installs inline and provides a protected pocket for the sensor while maintaining full flow through the mainline. Pipe & connection: Fits 2" (50 mm) Schedule 40 pipe; slip x slip solvent-weld (glue) connections for PVC installation. Sensor compatibility: Designed to house Hunter Flow‑Clik (Flow‑Sync) sensors — sensor and programming module sold separately. Dimensions & clearances: Height 6" (15 cm); width 2.7" (7 cm); length 4.7" (14 cm). Require 20" (50 cm) straight pipe upstream and 10" (25 cm) downstream for accurate readings. Flow guidance: 2" sensor applications: minimum ~10 GPM, suggested maximum ~55 GPM (based on Class 200 IPS pipe); observe recommended max velocity design practices. Durability & design: Schedule 40 PVC construction in white finish with a recessed sensor pocket for secure installation and straightforward maintenance. Installation tip: Use approved PVC solvent-weld glue and avoid excess uncured glue in the sensor pocket, and add a filter upstream on non-public water supplies to protect the sensor impeller. The FCT-200 tee enables reliable flow monitoring and high-flow shutdown when used with a Flow‑Clik sensor and controller. Consult the included product manuals and cutsheets for complete installation diagrams, electrical wiring limits, and calibration guidance before fitting. The receptacle tee ships as the plumbing body only; order the Flow‑Clik sensor separately if you require a complete flow-detection system.
