Brand: Hunter Industries SKU: NODE200 Product Overview The Hunter NODE-200 is a two-station, battery-operated irrigation controller for remote valve locations without AC power or conventional control wiring. It can operate two compatible DC-latching solenoids and is supplied without solenoids, allowing the installer to select the correct components for the valves already installed on site. The waterproof controller mounts in or near the valve box and uses a built-in LCD and buttons for programming. Three independent programs, four start times per program, run times up to six hours, manual operation, programmable off, and master-valve capability provide flexible control for gardens, drip zones, medians, and other isolated two-zone systems. Key Features Controls two independent irrigation stations Battery operation for sites without AC power Solenoids sold separately Waterproof valve-box-ready enclosure Three programs with four start times per program Maximum station run time of 6 hours Manual cycle and programmable off functions Supports master-valve operation in compatible designs Operates from one or two 9V alkaline batteries Common Uses Two remote irrigation valves Separate lawn and drip zones Gardens, medians, isolated beds, and temporary irrigation Sites where trenching controller wire is impractical Technical Specifications Stations: 2 Included Solenoids: None Compatible Solenoid Type: 9–11 VDC latching Power: One or two 9V alkaline batteries Programs: 3 Start Times: 4 per program Maximum Station Run Time: 6 hours Maximum Solenoid Wire Run: 100 ft with minimum 18 AWG wire Sensor Inputs: 1 Enclosure: Waterproof/IP68 Compatibility and Installation Notes Two compatible DC-latching solenoids are required and sold separately. Use the Hunter 458200 DC-latching solenoid with compatible Hunter plastic valves. Do not connect standard 24 VAC solenoids. Make all field splices with waterproof connectors and follow Hunter's wire-size, distance, and polarity instructions. Frequently Asked Questions Does NODE200 include solenoids? No. Hunter identifies NODE-200 as a two-station controller with the DC-latching solenoids ordered separately. Can it be programmed from a phone? No. The original NODE uses its built-in LCD and buttons. The NODE-BT-200 is the Bluetooth smartphone-controlled version. Can one battery be used? Yes. The NODE can operate from one or two 9V alkaline batteries; using two can extend service life. Why Buy the Hunter NODE200 from Big Frog Supply? The NODE200 gives two nearby valves independent battery-powered control without trenching back to an AC controller. Big Frog Supply identifies the controller-only package and links the required Hunter DC-latching solenoid so the complete installation can be planned correctly.
Related
Related
Related
Related