Hydro-Pack Complete Portable Water & Tool Cooling System — Wet Cutting Anywhere, No Faucet Required Wet cutting keeps blades cool, cuts clean, and silica dust down — but it usually ties you to a water source. On a remote site, a high-rise, or a finished space with the water shut off, that tether is the whole problem. The Hydro-Pack solves it completely: a self-contained, pressurized water system that brings cooling water straight to your tool anywhere, with no faucet, no hose hookup, and no power outlet. It's a complete system in three parts that work together. The pressurized 1.3-gallon Hydro-Tank is the source — a few pumps build enough pressure for a steady, consistent flow with nothing to plug in or hook up. The Hydro-Tail attachment straps onto your grinder, saw, or drill and directs a controlled stream of water right where it matters — on the blade, not your boots — with an adjustable valve for flow. And the 100 ft Hydro-Tube extension lets you range across a big jobsite without dragging the tank behind you every few feet. Together, they cool the blade for longer tool life, suppress the silica dust that dry cutting throws into the air, and keep your cut line clean and visible. It's built for the jobs where water is hardest to come by: remote sites with no hookups, indoor and finished spaces where dust and mess aren't an option, and large outdoor areas that cover real ground. It works with grinders, circular saws, polishers, and drilling rigs on porcelain, stone, and concrete — anywhere heat and dust are trying to slow you down. Why Tile Pros Choose It Water anywhere: Pressurized supply — no faucet, hose, or power required Complete system: Tank, tool attachment, and 100 ft extension in one kit Cooler blades, longer life: Constant water feed cuts heat, friction, and wear Dust control: Suppresses silica for safer, cleaner, more compliant work Adjustable flow: Precise cooling and slurry control at the valve Big reach: 100 ft Hydro-Tube covers the whole jobsite from one tank Tool-agnostic: Grinders, circular saws, polishers, and drilling rigs The closest your grinder gets to a cold drink: And it cuts better for it Pro tip: Pump the tank up to pressure before you start and get water flowing before the blade touches the material — a blade that's already hot chips the first cut. Dial the Hydro-Tail valve to the minimum steady flow that keeps a slurry at the cut, and route the Hydro-Tube clear of kinks so the flow stays consistent all the way to the tool.
Related
Related
Related
Related