The HYDROS Command Bus Terminator closes the Command Bus loop on your HYDROS reef controller setup, eliminating signal reflection that can cause flaky communication, dropped sensor reads, or false alarms. If you are running a HYDROS Control 4, Control X3/X4, or a chain of HYDROS modules with an open Command Bus port, this plug is the missing piece for rock-solid system integrity. Build out your HYDROS automation with more CoralVue HYDROS controllers, sensors, and accessories, browse all Automation & Controllers, or shop our complete Aquarium Equipment selection. Why You Need a Command Bus Terminator Eliminates signal reflection on the Command Bus so sensor and module data stay clean. Prevents communication errors between HYDROS Control units, dosers, sensors, and accessories. Required on any open Command Bus port when chaining controllers (e.g. Control 4 + Control 3, or any multi-controller setup). Plug-and-play — no configuration, no firmware step. Push it in, you are done. 1-year HYDROS warranty from CoralVue. How It Works The Command Bus is a CAN-style communication line that links HYDROS modules together. Without proper termination at each open end of the bus, signals bounce back and create reflections — the digital equivalent of an audio echo. The Terminator presents the correct impedance (a 120 ohm load) so signals end cleanly at the bus boundary. Install one on every unused Command Bus port in your chain. Specifications Brand HYDROS by CoralVue SKU HDRS-CBC-TM Type Command Bus terminator plug Function Signal termination & impedance matching (120 Ω) Color Blue Compatible With HYDROS Control X3/X4, Control 4, Control 3, and any HYDROS Command Bus device Warranty 1 year UPC 850009641335 Recommended Pairings HYDROS Command Bus Cable — connect your modules together with the matching data + power cable. HYDROS Control X3 XP8 Pro Pack — full smart controller bundle. HYDROS Control X4 XP8 Pro Pack — the top-tier reef automation setup. HYDROS P205 Smart Plug — add a WiFi outlet to any HYDROS system. HYDROS Triple Optical ATO Kit — auto top-off with redundant optical sensors. FAQ Do I need this if I only have one HYDROS Control unit?If both Command Bus ports on a single controller are unused, no — the controller terminates internally. As soon as you add a second HYDROS unit (a second Control, a doser, etc.) and leave any Command Bus port open, the open port needs a terminator. How many do I need?One on every unused Command Bus port in your chain. Most multi-controller setups use one or two total. Will it work on the original HYDROS Control 1?Yes — it terminates any HYDROS Command Bus connection regardless of controller generation. Is this needed for the Drive Port or Sense Port?No — those are separate connection types. The terminator is only for the Command Bus.
