Hydros DC Micro Pump The Hydros DC Micro Pump is a compact 12V brushless pump designed for use with compatible HYDROS Drive Ports. It is commonly used for auto top-off applications and other small aquarium water-moving tasks where a low-voltage pump can be powered and controlled through the HYDROS ecosystem. HYDROS DC Micro Pump Overview This small pump is built to work directly with compatible HYDROS controllers, allowing the Drive Port to provide both power and control. It is a practical choice for ATO systems using a HYDROS optical water level sensor or float switch, and it can help reduce wiring clutter because the pump does not need a separate power brick when connected to a compatible Drive Port. Its compact size makes it useful for smaller reservoirs, all-in-one tanks, sumps, and tight cabinet installations. DC Micro Pump Features Compact pump size makes it easy to fit in many ATO reservoirs and small utility areas. Powered and controlled through a compatible HYDROS Drive Port. No separate power cord is required when used with compatible HYDROS Drive Port equipment. Brushless 12V DC design supports efficient low-voltage operation. Useful with HYDROS optical water level sensors or float switches for ATO control. Works in freshwater and saltwater aquarium automation applications when properly installed. Uses a GX12 aviation-style connector for secure HYDROS connection. Hydros DC Micro Pump Specifications Product type: HYDROS Drive Port DC pump UPC: 4714041212006 Part number: HDRS-DP-200H Flow rate: 74 gph Maximum head: 8 ft Power: 4.5W at DC12V Motor style: DC brushless Life expectancy: 30000 hours Dimensions: 1.6" L x 1.062" W x 1.45" H Tubing size: 8.5 mm OD x 6.5 mm ID Connection: HYDROS Drive Port HYDROS Micro Pump Compatibility Notes The Hydros DC Micro Pump requires a compatible HYDROS controller with an available Drive Port or another suitable HYDROS Drive Port power configuration. Tubing is sold separately unless supplied as part of a kit. Confirm the pump head height, reservoir placement, tubing path, and siphon protection before using it for an automatic top-off system. Official HYDROS ATO Setup Video Using the HYDROS DC Micro Pump Place the pump in the freshwater reservoir or appropriate water source, connect the tubing securely, and plug the pump into a compatible HYDROS Drive Port. Configure the Drive Port output in the HYDROS app and test the pump under normal operating conditions before relying on it for unattended ATO or water-moving operation. What's Included 1 x Hydros DC Micro Pump 1 x HYDROS Drive Power Cable
