Hydros Leak Detection Sensor The Hydros Leak Detection Sensor is a HYDROS Sense Port accessory that detects freshwater or saltwater beneath the sensor body. It is designed to help protect aquariums, stands, sumps, cabinets, floors, and surrounding areas by notifying the HYDROS system when a surface leak is detected. HYDROS Leak Detection Sensor Overview This point-style leak detector is ideal for placing near equipment or plumbing areas where leaks are most likely to appear. Common locations include under sumps, beside return pumps, near external plumbing, around reactors, under skimmers, behind cabinets, and below RO or top-off equipment. When moisture is detected, the connected HYDROS system can send alerts and, when configured with compatible controlled outlets, trigger actions such as shutting down selected equipment. Point Leak Detection Features Detects freshwater or saltwater underneath the sensor body. Connects directly to a compatible HYDROS Sense Port. No separate power source is required when connected to a HYDROS Sense Port. Useful under aquarium stands, sumps, plumbing connections, reservoirs, and equipment areas. Can send mobile alerts through the HYDROS system when a leak is detected. Can support equipment shutdown actions when paired with compatible HYDROS-controlled outlets. Sealed design helps resist rust and supports long-term aquarium use. Uses a GX12 aviation-style connector for secure HYDROS connection. Hydros Leak Detection Sensor Specifications Product type: HYDROS point leak detection sensor UPC: 4714041211979 Connection: HYDROS Sense Port Cord length: 5 ft Sensor dimensions: 2.5 in x 2.5 in Power requirement: Powered through compatible HYDROS Sense Port Application: Freshwater and saltwater surface leak detection Compatible HYDROS devices: Control XS, X2, X3, X3-S, X4, X10, Launch, and Minnow Leak Sensor Compatibility Notes The Hydros Leak Detection Sensor requires a compatible HYDROS controller with an available Sense Port. Equipment shutoff actions require compatible HYDROS-controlled outlets such as a HYDROS WiFi Power Strip, Smart Plug, XP8, or other suitable output device. Place the sensor on a flat surface where water is likely to collect and test the input after setup. Official HYDROS Leak Sensor Video Setting Up the HYDROS Leak Detection Sensor Place the sensor in the desired leak-monitoring location, connect it to an available HYDROS Sense Port, and add the input in the HYDROS app. Test the sensor with a small amount of water to confirm the status changes correctly, dry it fully, then configure alerts or equipment responses based on the desired safety plan. What's Included 1 x Hydros Leak Detection Sensor
