Hydros Rope Leak Sensor Kit The Hydros Rope Leak Sensor Kit is a HYDROS leak-detection accessory designed to monitor a wider area than a single point leak sensor. The flexible rope sensor detects moisture anywhere along its length, making it useful around aquariums, sumps, stands, plumbing lines, reactors, reservoirs, mixing stations, and other areas where water may collect or travel before it reaches a small spot sensor. HYDROS Rope Leak Sensor Kit Overview This kit connects to a compatible HYDROS Sense Port and allows the HYDROS app to respond when water contacts the rope sensor. It can be used to send mobile alerts, trigger alarms, or support equipment actions when paired with compatible HYDROS-controlled outlets. The rope-style design is especially helpful for long or irregular leak-risk areas, such as around the perimeter of a sump, along the base of a stand, beside plumbing runs, or near external aquarium equipment. Rope Leak Detection Features Flexible rope-style sensor detects moisture anywhere along the sensing rope. Provides broader coverage than a single point-style leak detector. Useful around aquariums, sumps, stands, plumbing, reactors, mixing stations, and equipment areas. Connects to a compatible HYDROS Sense Port through the included adapter cable. Can be configured in the HYDROS app for alerts, alarms, or equipment responses. Included mounting clips help position the rope where water is most likely to appear. Suitable for freshwater and saltwater aquarium leak-detection applications. Hydros Rope Leak Sensor Kit Specifications Product type: HYDROS rope leak detection kit UPC: 850009641212 Part number: HDRS-LKDT-0011 Connection: HYDROS Sense Port through included adapter cable Application: Wide-area freshwater and saltwater leak detection System requirement: Compatible HYDROS Control with available Sense Port HYDROS Rope Leak Kit Compatibility Notes The Hydros Rope Leak Sensor Kit requires a compatible HYDROS Control device with an available Sense Port. Equipment shutdown actions require the equipment to be connected to a compatible HYDROS-controlled outlet or output. For best coverage, place the rope flat where water would naturally collect and avoid covering the sensing area with tape or mounting hardware. Official HYDROS Rope Leak Sensor Video Setting Up the HYDROS Rope Leak Sensor Kit Connect the rope sensor to the included adapter cable, plug the adapter into an available HYDROS Sense Port, and route the rope along the area that needs leak protection. Test the sensor with a small amount of water before regular use, dry the rope fully, then configure alerts or equipment responses in the HYDROS app. What's Included 1 x Leak sensing rope 1 x Adapter cable 10 x Mounting clips
