HYDROS Skimmer Sensor - Sense Port Accessory The HYDROS Skimmer Sensor serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump. The way it works is easy: just place the sensor inside any protein skimmer collection cup up to ¼” thick. There is a magnetic coupling that will sit on the outside of the skimmer cup to keep the sensor securely in place. Once the waste level in the collection cup rises to the point it makes contact with the sensor, it will tell HYDROS to turn the protein skimmer off to prevent overflowing. Your protein skimmer must be plugged into a HYDROS power source, like the Power 4 power strip or Smart Plug, for this sort of skimmer security to operate. The HYDROS Skimmer Sensor plugs into any HYDROS Sense Port and does not require any additional power supply. The optical eye on this sensor is designed to be used inside the collection cup of a protein skimmer, so it’s a little different than a standard water level sensor—but purpose-built for this specific and important application. The sensor contains no moving parts that can fail. It’s extremely tiny: it’s a little over a half-inch thick with a circumference the size of a US penny. The optical eye is magnetically coupled with the magnet side measuring only ¼” thick. The cord is on the magnet side so installation is easy. You don’t need to purchase a new lid for your skimmer or modify the collection cup in any way. The HYDROS Skimmer Sensor is an Official HYDROS Accessory manufactured by AutoAqua in Taiwan. Creators of the Smart ATO Micro, AutoAqua is one of the most well-known and trusted makers of aquarium automation systems in the hobby today. CoralVue has thoroughly tested the Skimmer Sensor to ensure seamless compatibility with the HYDROS platform. The product development team at CoralVue engineered the sensor so it connects with any HYDROS Sense Port using its aviation-style plug for safe operation. No additional power source is needed to run the sensor. Keep skimmate in the cup and not in the sump with the HYDROS Skimmer Sensor. HYDROS Skimmer Sensor Specs: Size: Diameter - 0.75” Sensor - 0.55” thick Magnet Mount - 0.25” thick Max Mounting Thickness: ¼” No Moving Parts Magnetic Attachment Purpose-built to be placed inside the collection cup of a protein skimmer. Attaches to any protein skimmer collection cup: you don’t need to purchase a new lid or modify your collection cup for it to work. For freshwater and saltwater aquariums The HYDROS Skimmer Sensor uses a GX12 aviation-style connector so the Control 2 and Control 4 maintain their IP65-rating (dust-tight and protected from water spray at any angle). Powered, monitored, and controlled by plugging into a Sense Port on the HYDROS Control 2 or Control 4. No additional power cord is required. Manufactured by AutoAqua, an official HYDROS Technology Partner. WARRANTY CoralVue, Inc. and HYDROS hereby guarantee this product to be free from defects in material and workmanship for a period of: 1 Year Warranty is activated on the date of purchase. This Standard Limited Warranty applies and is limited as follows: To the product only as long as it remains in the possession of the original purchaser. To the product that has not been subject to accident, misuse or abuse. To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc. That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent. That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time. Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
