Attention: HPMC and Sepimax Zen can both thicken 70% isopropyl alcohol at 3%. This bulk package pricing is in lieu of Customer Rewards Points accrual or other discounts. There may be a special order lead time if this is not in stock; Inquire before ordering. CAS No. 9004-65-3 Hydroxypropyl Methylcellulose (HPMC) is multifunctional as a lubricant, foam enhancer and stabilizer, thickener, emulsion stabilizer and film former for hair and skin care products. HPMC is especially useful in surfactant systems for its foam enhancing properties, helping with the formation of bubble structure, leading to richer, longer lasting lather. HPMC has a high tolerance for both salt and alcohol. Techniques for Dispersion The preferred method is to begin by heating approximately 1/3 of the total formulation water to 167°F (75°C) or higher. Add the HPMC to the vortex of agitated and heated water. Mix until fully dispersed. HMPC will not dissolve at this temperature. After complete dispersion, add the remaining water at room temperature or colder and continue mixing for 30 minutes after the total solution has cooled to 77°F. (25°C) or less. Proceed with the formulation. If heating is impossible, it is preferred to slurry the HPMC in a non-solvating media, such as glycerin or PEG, then add the slurry to the vortex of vigorously agitated water. Adding HPMC directly to cold water is not preferred, but if necessary, must be done very slowly under vigorous agitation. Expect longer mixing times for complete dissolution. INCI: Hydroxypropyl Methylcellulose California Prop 65 Statement: The following statement is made in order to comply with the California Safe Drinking Water and Toxic Enforcement Act of 1986. This product is not known to the State of California to cause cancer, birth defects or other reproductive harm. SDS &Tech Data Marketing Info Benecel Hydroxypropyl Methylcellulose (HPMC) Technical Specifications Benecel Hydroxypropyl Methylcellulose (HPMC) Technical Info Bencel Hydroxypropyl Methylcellulose (HPMC) Surfactant Compatibility with Benecel E10M HPMC Benecel E10M Hydroxypropyl Methylcellulose (HPMC) SDS Formulation Guide Typical Use Rate: 0.5 - 3% Manufacturer: Ashland Product: Benecel E10M Appearance: Off-white granular powder Solubility: Soluble in water Viscosity (2% solution, dry): 7,500 - 14,000 mPa.s pH: 5.0 - 8.0 Chemical Charge: Nonionic Country of Origin: USAShelf Life: 1-3 years, retest viscosity after 1 year
