Use the i-Pilot wireless remote set anchor points, tracks, cruise control, direction, or control any other function of your non-bluetooth Minn Kota i-Pilot trolling motor. This i-Pilot remote control can be used to add an additional remote to your system or to replace a lost remote. The LCD screen displays the motors current settings, GPS signal strength, battery status, direction, and prop status. The i-Pilot replacement remote uses a single CR2450 coin-cell battery. Lanyard not included. Split Part Number: 1866350 Recommended For: Adding another remote to your i-Pilot trolling system or replacing a lost remote control. Compatible With: The i-Pilot replacement remote is compatible with all non-bluetooth i-Pilot trolling motors. Lanyard not included. Installation Notes: To add an additional or replace an i-Pilot remote, the new remote needs to be synced or "learned" to the trolling system. Steps to syncing or "learning" the new remote Power up the trolling motor. Push and hold the learn button down (learn button is located at the top of the remote). A steady audio tone will be heard while holding this button. While holding the learn button on the controller, push any button on the remote. Three short chirps will be heard when the remote is successfully learned. Note: A remote can only be learned to one i-Pilot system at a time. i-Pilot systems can have an unlimited amount of remotes. Additional Details: The i-Pilot replacement remote is covered by Minn Kota's two-year warranty. Video No Split
