Application Application sanitary and wet areas in the food industry Electrical data Operating voltage [V] 26.5...31.6 DC Max. current consumption from AS-i [mA] 240 Additional voltage supply [V] 20...30 DC; (AUX) Max. current consumption from additional supply [mA] 2100; (AUX) Integrated watchdog yes Inputs / outputs Number of inputs and outputs Number of digital inputs: 4; Number of digital outputs: 3 Inputs Number of digital inputs 4 Input circuit of digital inputs PNP; (type 2 according to IEC 61131-2) Sensor supply of the inputs AS-i Voltage supply [V] 18...30 Max. total current rating of inputs [mA] 200 Input current High [mA] 6...10 Input current low [mA] 0...2 Switching level high [V] > 11 Digital inputs protected against short circuits yes Outputs Number of digital outputs 3 Circuit PNP Voltage range DC [V] 20...30; (AUX) Max. current load per output [mA] 700; (utilization category DC-13 (control of electromagnets): 20 W (IEC 60947-5-1)) Max. current load outputs total [A] 2.1 Short-circuit proof yes Electrically separated yes Operating conditions Ambient temperature [°C] -5...70 Max. relative air humidity [%] 90; (linearly decreasing to 50 % (40 °C) non condensing) Max. height above sea level [m] 2000 Protection IP 68; IP 69K Degree of soiling 2 Tests / approvals EMC EN 62026-2 EN 61000-6-2 MTTF [years] 160 AS-i classification AS-i version 2.1 Extended addressing mode yes AS-i master profile M2; M3; M4 AS-i profile S-7.A.E AS-i I/O configuration [hex] 7 AS-i ID code [hex] A.E AS-i certificate 101107 Data bits Data bit D0 D1 D2 D3 Input 1 2 3 4 Socket I-1/2 I-1/2 I-2 I-3/4 I-3/4 I-4 Pin 4 2 4 4 2 4 Output 1 2 3 - Socket O-1 O-2 O-3 - Pin 4 4 4 - Mechanical data Weight [g] 632 Dimensions [mm] Ø 137.3 / L = 80 Material threaded bush: stainless steel (1.4404 / 316L); LED-Fenster: PC; O-ring: EPDM; Protective cap: PP Displays / operating elements Display Power LED, green errors LED, red Function LED, yellow Electrical connection Module connection M12 Accessories Accessories (optional) Torque wrench:, E70390 Protective cap: M12, E70297 Flat cable splitter box:, E70354 Remarks Remarks Inputs and outputs must be electrically isolated. Do not connect any of the following points to an external potential: I-, I+, I-1/2, I-2, I-3/4, I-4 The connections are electrically connected with the AS-i cable. The round cable connected to AS-i/AUX should not be longer than 2m. Pack quantity 1 pcs. Electrical connection - AS-i Connector: M12; coding: A; Tightening torque: 1.2...1.4 Nm Electrical connection - Inputs Connection Connector: M12; coding: A; Tightening torque: 1.2...1.4 Nm Electrical connection - Outputs Connector: M12; coding: A; Tightening torque: 1.2...1.4 Nm
