Product characteristics Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1 Measuring range -0.124...2.5 bar -1.8...36.27 psi -12.4...250 kPa Process connection Clamp DN40 (1,5") DIN 32676 (ISO 2852) Application System gold-plated contacts Application flush mountable for the food and beverage industry Media viscous media and liquids with suspended particles; liquids and gases Medium temperature [°C] -20...200 Min. bursting pressure 50 bar 725 psi 5000 kPa Pressure rating 20 bar 290 psi 2000 kPa Type of pressure relative pressure Electrical data Min. insulation resistance [MΩ] 100; (500 V DC) Protection class III Reverse polarity protection yes Integrated watchdog yes 2-wire Operating voltage [V] 20...32 DC Current consumption [mA] 3.6...21 Power-on delay time [s] 1 3-wire Operating voltage [V] 18...32 DC Current consumption [mA] < 45 Power-on delay time [s] 0.5 Inputs / outputs Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1 Outputs Total number of outputs 2 Output signal switching signal; analog signal; IO-Link; (configurable) Electrical design PNP/NPN Number of digital outputs 2 Output function normally open / closed; (configurable) Number of analog outputs 1 Analog current output [mA] 4...20, invertible; (scalable) Short-circuit protection yes Type of short-circuit protection yes (non-latching) Overload protection yes 2-wire Max. load [Ω] 300 3-wire Max. voltage drop switching output DC [V] 2 Permanent current rating of switching output DC [mA] 250 Switching frequency DC [Hz] 125 Max. load [Ω] (Ub - 10 V) / 20 mA Measuring/setting range Measuring range -0.124...2.5 bar -1.8...36.27 psi -12.4...250 kPa Set point SP -0.12...2.5 bar -1.74...36.27 psi -12...250 kPa Reset point rP -0.124...2.496 bar -1.8...36.21 psi -12.4...249.6 kPa Analog start point -0.124...1.88 bar -1.8...27.27 psi -12.4...188 kPa Analog end point 0.5...2.5 bar 7.26...36.27 psi 50...250 kPa In steps of 0.002 bar 0.03 psi 0.2 kPa Factory setting SP1 = 0.624 bar rP1 = 0.574 bar SP2 = 1.874 bar rP2 = 1.824 bar ASP = 0.000 bar AEP = 2.500 bar Accuracy / deviations Switch point accuracy [% of the span] < ± 0,2; (Turn down 1:1) Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) Characteristics deviation [% of the span] < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) Linearity deviation [% of the span] < ± 0,15; (Turn down 1:1) Hysteresis deviation [% of the span] < ± 0,15; (Turn down 1:1) Long-term stability [% of the span] < ± 0,1; (Turn down 1:1; per year) Temperature coefficient zero point [% of the span / 10 K] < ± 0,2; (0...200 °C) Temperature coefficient span [% of the span / 10 K] < ± 0,15; (0...200 °C) Reaction times Damping process value dAP [s] 0...30 Damping for the analog output dAA [s] 0.01...99.99 2-wire Step response time analog output [ms] 45
