Product characteristics Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1 Measuring range -1...1 bar -1000...1000 mbar -14.5...14.5 psi -100...100 kPa Process connection threaded connection G 1 external thread Aseptoflex Vario Application System gold-plated contacts Application flush mountable for the food and beverage industry Media viscous media and liquids with suspended particles; liquids and gases Medium temperature [°C] -25...125; (145 max. 1h) Min. bursting pressure 30000 mbar 435 psi 3000 kPa Pressure rating 10000 mbar 145 psi 1000 kPa Vacuum resistance [mbar] -1000 Type of pressure relative pressure; vacuum No dead space yes MAWP (for applications according to CRN) [bar] 10 Electrical data Min. insulation resistance [MΩ] 100; (500 V DC) Protection class III Reverse polarity protection yes Measuring principle hydrostatic Integrated watchdog yes 2-wire Operating voltage [V] 20...32 DC Current consumption [mA] 3.6...21 Power-on delay time [s] 1 3-wire Operating voltage [V] 18...32 DC Current consumption [mA] < 45 Power-on delay time [s] 0.5 Inputs / outputs Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1 Outputs Total number of outputs 2 Output signal switching signal; analog signal; IO-Link; (configurable) Electrical design PNP/NPN Number of digital outputs 2 Output function normally open / closed; (configurable) Number of analog outputs 1 Analog current output [mA] 4...20, invertible; (scalable) Short-circuit protection yes Type of short-circuit protection yes (non-latching) Overload protection yes 2-wire Max. load [Ω] 300 3-wire Max. voltage drop switching output DC [V] 2 Permanent current rating of switching output DC [mA] 250 Switching frequency DC [Hz] 125 Max. load [Ω] (Ub - 10 V) / 20 mA Measuring/setting range Measuring range -1...1 bar -1000...1000 mbar -14.5...14.5 psi -100...100 kPa Set point SP -998...1000 mbar -14.45...14.5 psi -99.8...100 kPa Reset point rP -1000...998 mbar -14.5...14.45 psi -100...99.8 kPa Analog start point -1000...500 mbar -14.5...7.25 psi -100...50 kPa Analog end point -500...1000 mbar -7.25...14.5 psi -50...100 kPa In steps of 1 mbar 0.05 psi 0.1 kPa Factory setting SP1 = -500 mbar rP1 = -540 mbar SP2 = 500 mbar rP2 = 460 mbar ASP = -1000 mbar AEP = 1000 mbar Accuracy / deviations Switch point accuracy [% of the span] < ± 0,2; (Turn down 1:1) Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) Characteristics deviation [% of the span] < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) Linearity deviation [% of the span] < ± 0,15; (Turn down 1:1) Hysteresis deviation [% of the span] < ± 0,15; (Turn down 1:1) Long-term stability [% of the span] < ± 0,1; (Turn down 1:1; per year) Temperature coefficient zero point [% of the span / 10 K] < ± 0,05; (0...70 °C) Temperature coefficient span [% of the span / 10 K] < ± 0,15; (0...70 °C)
