IGL Ecoclean Iron is a concentrated iron fallout remover and wheel cleaner designed to dissolve embedded brake dust, rail dust and other ferrous contamination from paintwork and wheels. Its water-based, acid-free and pH-balanced formula reacts with iron contamination, turning purple as it breaks the particles down so they can be safely rinsed away. With a low-odour formula and broad surface compatibility, Ecoclean Iron is ideal for both routine wheel cleaning and deeper paint decontamination before polishing or ceramic coating. KEY BENEFITS Removes embedded iron fallout, brake dust and ferrous contamination Dual-purpose formula for paint decontamination and wheel cleaning Water-based and acid-free pH-balanced at approximately pH 7 Low-odour formula Safe for paint, clear coats, alloy wheels and glass when used as directed IGL lists the formula as suitable for carbon fibre and carbon brake discs Reactive formula turns purple as it dissolves iron contamination Can be diluted for regular wheel cleaning BEST USED FOR Ideal for removing stubborn brake dust from wheels, decontaminating paintwork and preparing a vehicle before polishing, paint correction or ceramic coating. For paint decontamination, Ecoclean Iron should be used at full strength. For wheel cleaning, the concentrated formula can be diluted with water at approximately 1:0.5 – one part Ecoclean Iron to half a part water. For example, 500ml of Ecoclean Iron can be mixed with 250ml of water to produce 750ml of wheel cleaner. SURFACE COMPATIBILITY Paintwork ✓ Clear Coat ✓ Alloy Wheels ✓ Ceramic Coatings ✓ Glass ✓ Carbon Fibre ✓ Carbon Brake Discs ✓ HOW TO USE PAINT DECONTAMINATION Use undiluted / full strength when removing iron fallout from paintwork. Ensure the surface is cool before application. Spray IGL Ecoclean Iron evenly over the contaminated area. Allow the product to dwell for approximately 2–5 minutes. The product will change colour as it reacts with iron contamination. Agitate with a soft brush or suitable wash media if required. Rinse thoroughly with water. Repeat on heavily contaminated areas if necessary. Do not allow Ecoclean Iron to dry on the surface. WHEEL CLEANING For regular wheel cleaning, dilute approximately: 1 part Ecoclean Iron : 0.5 parts water Example:500ml Ecoclean Iron + 250ml water = 750ml wheel cleaner Apply to a cool wheel. Allow the product to react with embedded brake dust and contamination. Agitate with a suitable wheel brush or wash mitt where required. Rinse thoroughly with water. RECOMMENDED DECONTAMINATION PROCESS 1. WashThoroughly wash and rinse the vehicle to remove loose dirt and contamination. 2. Iron DecontaminationApply IGL Ecoclean Iron to remove embedded ferrous contamination from the paintwork and wheels. 3. Further DecontaminationUse mechanical decontamination such as a clay towel where required to remove remaining bonded contamination. 4. Polish or PreparePolish the paint where required, or use IGL Ecoclean Strip as the final surface-preparation step before applying a coating. FAQ What does IGL Ecoclean Iron remove? Ecoclean Iron targets ferrous contamination including embedded brake dust, rail dust and iron fallout that normal car shampoo may not remove. Why does Ecoclean Iron turn purple? The colour change occurs as the formula reacts with iron particles and breaks them down into contamination that can be rinsed away. Can I use IGL Ecoclean Iron as a wheel cleaner? Yes. Ecoclean Iron can be diluted approximately 1:0.5 with water for use as a wheel cleaner, making it suitable for both routine maintenance and heavier brake-dust removal. Is IGL Ecoclean Iron safe for paintwork? Yes. It is water-based, acid-free and pH-balanced, and is designed for use on automotive paint and clear coats when used as directed. Can I use Ecoclean Iron before applying a ceramic coating? Yes. Iron removal is an important part of paint decontamination before polishing or coating because it removes embedded ferrous contamination from the surface. Is Ecoclean Iron safe on carbon brake discs? IGL lists Ecoclean Iron as suitable for both carbon fibre and carbon discs when used as directed. How long should I leave Ecoclean Iron on the surface? Allow approximately 2–5 minutes for the product to react. Agitate if required and rinse thoroughly before the product dries.
