IGL Ecoclean Wash is a pH-neutral car shampoo designed for safe, effective contact washing without compromising existing waxes, sealants or ceramic coatings. Its low-foam, high-lubricity formula helps lift dirt from the surface while providing the slickness needed for a smooth contact wash. It rinses clean without leaving an unwanted film, making it ideal for regular maintenance of both coated and uncoated vehicles. For a complete maintenance wash, use IGL Ecoclean Blizzard as the pre-wash, rinse thoroughly, then follow with Ecoclean Wash for the contact-wash stage. KEY BENEFITS pH-neutral car shampoo Safe for ceramic coated and uncoated vehicles Designed to clean without stripping waxes, sealants or ceramic coatings Low-foam, high-lubricity formula Helps reduce friction during contact washing Rinses clean without leaving an unwanted film Suitable for paintwork, PPF and vinyl wraps Matte paint safe Suitable for regular maintenance washing Biodegradable surfactant system BEST USED FOR Ideal for routine contact washing where effective cleaning and good lubrication are required without unnecessarily attacking existing vehicle protection. Ecoclean Wash is particularly suited to ceramic coated vehicles, but can also be used on uncoated paint, waxed or sealed vehicles, PPF and vinyl-wrapped finishes. For heavily contaminated vehicles, use IGL Ecoclean Blizzard first as a pre-wash to remove as much loose contamination as possible before beginning the contact wash. SURFACE COMPATIBILITY Paintwork ✓ Ceramic Coatings ✓ Waxes & Sealants ✓ PPF ✓ Vinyl Wrap ✓ Matte Paint ✓ Wheels ✓ Exterior Plastic Trim ✓ HOW TO USE CONTACT WASH Rinse the vehicle thoroughly to remove loose dirt and grit. Dilute IGL Ecoclean Wash with clean water according to the product instructions for your chosen wash method. Wash the vehicle using a clean microfibre wash mitt and your preferred bucket-wash method. Work around the vehicle in sections, regularly rinsing the wash mitt to minimise transferred contamination. Rinse the vehicle thoroughly with clean water. Dry using a clean microfibre drying towel. Avoid washing on hot surfaces or allowing shampoo solution to dry on the vehicle. RECOMMENDED WASH PROCESS 1. Pre-WashApply IGL Ecoclean Blizzard to help loosen road grime and surface contamination before contact washing. 2. RinseThoroughly rinse away the pre-wash and loosened contamination. 3. Contact WashWash using IGL Ecoclean Wash with a clean microfibre wash mitt. 4. Dry & ProtectDry using a quality microfibre drying towel. Apply IGL Ecoshine Enhancer as a drying aid where additional gloss, slickness and hydrophobic protection are desired. FAQ Is IGL Ecoclean Wash pH neutral? Yes. Ecoclean Wash is a pH-neutral shampoo designed for regular automotive maintenance washing. Is Ecoclean Wash safe for ceramic coated vehicles? Yes. It is specifically designed to clean without stripping or unnecessarily degrading ceramic coatings, making it suitable for regular coating maintenance. Can I use Ecoclean Wash on an uncoated car? Yes. Ecoclean Wash can be used on coated or uncoated paintwork and is also suitable for vehicles protected with conventional waxes or sealants. Is IGL Ecoclean Wash safe on PPF and vinyl wraps? Yes. IGL lists Ecoclean Wash as suitable for both PPF and vinyl-wrapped surfaces. Can I use Ecoclean Wash on matte paint? Yes. IGL Australia specifically lists Ecoclean Wash as matte-paint safe. Why does IGL Ecoclean Wash produce less foam than some car shampoos? Ecoclean Wash is formulated as a low-foam, high-lubricity shampoo. Large amounts of visible foam are not required for the shampoo to provide cleaning action and lubrication during a contact wash. Should I use Blizzard or Wash? They perform different jobs and work well together. IGL Ecoclean Blizzard is best used as the pre-wash to loosen contamination before contact, while IGL Ecoclean Wash is used for the main contact-wash stage.
