IMCS-1600-10L is an induction semi-auto melt-casting system with 10 L capacity for various metal alloys up to 1600ºC under an inert environment. The functions of mechanical stirring and secondary charge are optional upon request. SPECIFICATIONS: Power Requirements 380 or 480 VAC, 3p, 50/60Hz Max Output: 35 KW Induction Heating Chamber 10-L capacity of the graphite crucible with dimension of Φ215×300mm (about 15 kg steel) Pneumatic graphite stopper for pressurized melt-casting process (~20 psig) An 18-turn water-cooled induction coil for uniform heating. Water-cooled heating and casting chambers. Mechanical stirring and secondary material doser are optional upon request. Casting Chamber Water-cooled and atmosphere-controlled casting chamber Pneumatic lift system to facilitate casting chamber open and close. Various options of casting mold upon request. Please contact MTI for details. Casting Mold Casting mold is required but not included in the standard package. Please contact MTI for more details. Water-cooled Copper Mold (Optional) Customized water-cooled split copper mold is optional, which allows faster cooling of the melt. reduce the possibility of oxidation during casting easily remove the ingot from the mold after casting Temperature Control Max working temperature 1600ºC Type B thermocouple with graphite sheath Programmable temperature control with up to 20 segments. Vacuum and Inert Gas Max vacuum level: 1 torr A mechanical pressure gauge is included. Inert Gas Requirement: 5 L/min @ 0.7 bar (10 psi) hi-purity nitrogen or argon Double stage rotary vane vacuum pump is included Water Chiller (Optional) > A 50 L/min water circulator is required but not included to cool down the induction coil, chambers, and optional copper mold Compressed air 58~87 psi compressed air is required. The air compressor below is optional to provide compressed air supply. Compliance CE certified NRTL or CSA certification by the third party is available upon request at the extra cost
