Features Continuous mixing, spraying and pumping of pre-blended cementitious and gypsum based mortars, stucco, fireproofing, self-leveling underlayments and grouts Single-phase 3 HP motor with “turbo boost” to 5 HP 6 speed settings deliver up to 120, 50lb bags per hour Use in wet or dry mode depending on your needs Air compressor-ready 100% duty cycle motors can run all day long Inverter technology balances the power and monitors the electricity for maximum performance Add the optional compressor to mix and spray 16 bags of fireproofing per hour Includes: D8 - 1.5 stator and rotor w/tab Turbo mixer kit with material delivery pressure gauge Gear-driven feed impeller Control panel w/ exclusive IMER 6-speed inverter Self-priming water booster pump Water system with flow meter and drainage valves 66' power cord 3/4" (19 mm) x 66' water hose 1" (25 mm) x 50' material hose 1-3/8" (35 mm) - 1" (25 mm) reducer Hose cleaning kit with toolbox Mixing chamber clean out tool Details The Koine 3.1 is designed to be a continuous pump for feeding bags of dry material such as underlayment, mortar or grouts. But when you need to mix the material with lots of additives which require longer mixing times then switch to wet mode, use a separate mixer such as the Mix 120 and pour it into the hopper to use it as just a pump. This gives the flexibility and versatility to be used for any application. Rinse out the hopper when finished. MPN 1106351 Power Supply 240 V 1Ø Max Installed Power 4.5 hp Mixer Motor Power 3 hp Electric Pump Motor Power .6 hp Flow Rate - Dry Mode 1/4 - 3/5 cu ft / min Flow Rate - Wet Mode .08 - 3/5 cu ft / min Hopper Volume 2.65 cu ft Loading height 39" Dimensions l/w/h 42" x 26" x 59" Weight 350 lb
