AirShields TI 100 Infant IncubatorCondition REFURBISEHD FEATURES Intended for transport of high risk, premature, low birth-weight, or critically ill newborns. It provides a means to control air temperature, oxygen concentrations, and relative humidity. A double wall hood permits full visibility and provides an effective thermal barrier from the environment. SPECIFICATIONS Dimensions (with stand): Length: 40.25 in. (102 cm) Width: 22.25 in. (56.5 cm) Height: 46.75 in. (118.7 cm) maximum, 34.75 in. (88.3 cm) minimum Power Requirements: AC: 110.120 VAC 50/60/400 Hz, sine or square wave 170/200 Watts and 225/270 Watts with batteries charging. DC: 12 VDC, 115 Watts Internal Battery: Type: gel type, sealed and rechargeable. Voltage: 12 VDC nominal Quantity: 2 Charging Time: two batteries take 20 minutes to recharge from fully discharged. Life expectancy: minimum 200 full charge/discharge cycles. Chassis Leakage Current: 100µA or lessAlarms: High Temp: Actuates at displayed incubator temperature of 39º ± 0.5 ºC. Sensor: Actuates if High Temp alarm sensor is electrically open or shorted. Power Failure: Actuates if main AC power fails and no DC back-up power is present. Heater Temp: Actuates if heater temperature exceeds 77 ºC nominal. Low DC: Actuates if incubator DC voltage has fallen below 10.5 VDC nominal. Temperature: Set Point Range: 21.5 ºC ± 1.0 ºC to 38 ºC Rise Time: 30 minutes Variability: 0.2 ºC Overshoot: 1.5 ºC maximum Uniformity: 1 ºC Correlation of Displayed Incubator to Actual Incubator Temperature at Temperature Equilibrium: 1 ºC Correlation of Displayed Incubator Temperature to Set Point at Temperature Equilibrium: ± 0.5 ºC Observation Light Output: 10-foot candles at mattress level
