Inflatable Bimini Decktent M Description Create a new way of life on board and "forget" about sunburn! With the DECKTENT inflatable bimini you can enjoy sun protection on the entire deck of your boat. The DECKTENT can be set up within a few minutes. Inflate it, place it on deck at a suitable location and fix it in place. No need for a bimini pole or special brackets! Setting up a bimini has never been so easy! Structure The inflatable structure consists of an outer fabric made of DACRON 600 and an inner heat protection layer (Thermoretardent) made of PE and the tube made of TPU. The valves used are pressure relief valves that open when the pressure is too high. The complete structure can be separated from the inner hose by means of zippers, e.g. for cleaning purposes. Assembly and Disassembly We recommend to inflate the inflatable air hoses with an electric pump (12V/220V) with high flow rate (> 400 l/minute) and integrated pressure gauge to 4.0 PSI / 0.28 bar. A possibly existing high pressure pump of a surfboard/paddleboard can be used — but will not bring much joy, because the required air volume of the bimini is more than 10 times of a board. A suitable 12V pump with battery we offer in the accessories — see below! Mounting The DECKTENT is equipped with 2 height adjustable straps on each leg. These straps can be easily attached to a fixed part of the boat, be it a railing support, railing or lifeline, the grab handles of an inflatable boat/RIB or a cleat. The DECKTENT can remain mounted on deck up to a cruising speed of up to 20 knots — provided that the boat structure at the attachment points can withstand the wind pressure encountered. Sun Protection The sunsail is a tightly woven sailcloth made of the branded fiber Dacron 300D and offers an Ultraviolet Protection Factor (UPF) of 30+. Dacron is made of tightly woven polyester fibers. It offers very high tear and abrasion resistance, is completely windproof and water repellent (not waterproof). Fitting: Motorboats: from 10 to 13 meters Sailboats: from 14 to 18 meters Technical Specifications Weight - Dimensions - Height Front: 2.00 mBack: 2.25 m Length 2.50 m Width Front: 1.85 – 2.50 mBack: 2.80 – 3.40 m
