The initiation kit must be assembled by the chapter. Chapters are encouraged to reuse components that are still in working order. Instructions for assembly are sent with orders or can be downloaded. Chapters are encouraged to review the instructions to determine which parts can be reused. Bases, shades, brackets, and candelabra tubes may be 3D-printed here.Instructions link: https://drive.google.com/file/d/1vP9xTurqDUbUiHD4IXXYFEDZmir-UNvP/view?usp=drive_linkComplete Kit includes: controller kit, light assembly, and lamp kit.Controller: 2 Plastic Boxes 1 Rotary Switch 1 Knob for Switch 1 300 ohm 1/4W Resistor 1 each Banana Jack Connector; white black, blue, red, green 1 each Banana Plug Connector; white, black, blue, red, green 2 FT Heatshrink Plastic Tubes 5 Gate Triac Isolated 8.0A 400V 5 1.0M ohm 1/4W Resistors 24 FT 22/2 Conductor 7./30 Speaker Wire 8 FT Unshielded 22AWG 6 Conductor Wire 5 6-32X3/8 Phillips Head Machine Screws W/ Hex Nut Lamp Kit: 5 Adjustable Keyless Candelabras 5 1/2" Long, 1/8/ IP Steel Nipples 5 White Plastic Candle Covers 5 Heavy 1/8F, Steel Counter Sunk Hexnuts 4 6ft Brown 18/2 Plastic Covered Lamp Cords 2 8 FT Brown 18/2 Plastic Covered Lamp Cords 5 Bases Light Bracket Assembly: 5 Aluminum Brackets 5 6-32x3/4 Machine Bolt W/ Hex Nuts 5 6-32 Knurled Nuts 5 4w Clear Night Light Bulbs 5 Shades (if ordered, if not, reuse shades from old kit) One Brown Tablecloth: 18' x 6' seal brown tablecloth with (5) 2" holes 33" from the back edge.* Images are for illustrative purposes only and not indicative of the actual items you will receive. **
