Mounting panel with rear mounted box. 3 sizes for first (forward), second (middle) and third(rear) lower wall openings behind driver. The outside surface is flush with the surrounding sheet metal so wall panels can go over. Panel and box sides is expanded PVC. Back panel is .25" thick ABS plastic. Depth of box from face of panel is 2 3/4". Interior dimensions of boxes are as follows1st Panel position, 9021713inside dimensionsheight 16" width 11.5" depth 2.75"opening sizeheight 15.25 width 11.25" corner radius 1" 2nd panel position, 9021750inside dimensionsheight 16" width 11.45" depth 2.75"opening sizeheight 15.25 width 11.2" corner radius 1"3rd panel position, 9021755inside dimensionsheight 16" width 9" depth 2.75"opening sizeheight 15.25 width 8" corner radius 1"note: on the 3 boxes the above depth is from the front face of panel which is .75 thick These are great for mounting electronics such as inverters, fuse panels, solar controllers, DC-to-DC chargers, switches, etc. Holes can be cut or drilled into sides of box for cable/wire routing. Thick back panel holds screws well for mounting components. Plastic construction is non conductive for increased electrical safety. There is room for back lighting with LED strip at top inside of box. Fits behind wall panels. We also have solid panels for these positions and boxes or solid panels for the rear section on a 170/170ext WB. See these in the accessories list. Please contact Hein at 541 49O 5O98 if you have questions.We are honored to help you with your van build. DISCLAIMER: Owner and/or installer assumes all risks associated with products and/or components purchased from DIYvan. Owner and/or installer recognizes and agrees that this product, and any of its component parts, is sold “as is” and that DIYvan makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Related
Related
Related
Related