Inserts to use for production for the Silky Socks Beanies! Cut into shape so you can get straight to production and don’t have to cut your own. The insert will stretch the beanie some and allow you for easy laying down of the product nice and flat, as well as easy roll technique to eliminate the line on the side. Production process: Load insert into the beanie, press one side. Then flip over and roll up the 1st side to the 2nd side a bit so the printed area covers the line around the jig, then press the 2nd side for a nearly seamless look. Note: We suggest using 2 of our beanies Jigs stacked for the "Thick" style beanie, or even 3 at once. As that beanie is quite thick and requires more Roll than the mid and thin style. So if you use multiple Jigs together you will have an easier time to eliminate the line on the top and do the roll technique. Youth sizes: We don't offer smaller Jigs for beanies for youth sizes. We only have 1 size. However for the youth large this Jig should work well. For the youth small we suggest cutting the width of the Jig about 1-1.5". Measurement: The Beanie measures 10" wide x 11" tall and is shaped like a beanie. This measurement includes excess height. - For $6 you will get 1 pair of these Jigs. - For $15 you will get 3 pairs of these Jigs. Things to Note: These inserts are NOT meant to last forever. They are meant to last approximately 6 months with regular use if used properly and handled with care. After they bend, crack or break new ones would need to be ordered. Silky Socks does not supply replacement inserts for free under any circumstances, as it's meant to be disposed of after reasonable usage and not to last forever.
