MALIIGAZA STEP-09 Motion Sensor Stair Light Kit | Main-Line COB Step Lights, 5–28 Steps

MALIIGAZA Official Store Verified independent store

→

MALIIGAZA STEP-09 is a main-line motion sensor stair light kit for 5–28 indoor steps. It combines sequential COB step lighting, daylight sensing and remote control with fixed 3000K , 4000K or 6000K options and 1m or 1.2m strips. Choose it when a continuous, serviceable main-line route and higher step capacity matter most. It does not support a smartphone App, wireless wall-switch control or a separate side-flow light. STEP-09 at a glance Step rangeChoose a current 5–28-step kit. Connection layoutStep lights plug into nearby nodes along one main cable. ControlsMotion sensing, daylight sensing and remote control; no smartphone App. Light optionsFixed 3000K, 4000K or 6000K; 1m or 1.2m strips. Choose STEP-09 if: you need sequential fixed-white lighting for as many as 28 steps and can keep its main line and nodes accessible for service. Choose another MALIIGAZA model if: choose STEP-P5 for Bluetooth App, timer and selected-step control, or STEP-07 for a wireless wall switch and dedicated always-on mode. Compare STEP-09, STEP-P5 and STEP-07 side by side. Why choose the STEP-09 main-line stair light kit? Sequential light that follows the stair route When motion is detected near the staircase, the controller starts a step-by-step lighting sequence instead of switching every tread on at once. The result is a clear nighttime route with a restrained architectural rhythm. A main-line layout for simpler cable planning Each COB step light connects to a nearby point on the main cable. Compared with layouts that route a separate long lead from every tread to the controller, this product-defined structure can reduce route complexity when the staircase has a suitable continuous cable path. Continuous COB illumination without visible LED dots The high-density COB strip creates an even line of light rather than a row of separated light points. Aluminum profiles are not included in MALIIGAZA stair-light kits and are not required to create this dot-free COB appearance. Daylight-aware motion operation STEP-09 includes daylight sensing, helping the motion-lighting system respond to ambient-light conditions. Sensor placement and settings still need to follow the current instructions and the actual light conditions around your stair entrance. Verified STEP-09 specifications ModelMALIIGAZA STEP-09 ApplicationIndoor staircase step lighting Lighting effectSequential, step-by-step illumination Maximum supported rangeUp to 28 illuminated steps Control methodsMotion sensing and remote control Ambient-light controlDaylight sensor recorded for STEP-09 White-light choices3000K / 4000K / 6000K fixed options Strip-length choices1m / 3.28ft or 1.2m / 3.94ft How to choose your configuration Count the illuminated steps. Include non-standard first or last treads that need their own light. Select the exact step-count kit. Current variants cover 5 through 28 steps. Choose one fixed white color. 3000K is warm white, 4000K is natural white and 6000K is cold white; they are separate purchase options, not one adjustable-CCT strip. Choose 1m or 1.2m strips. Match the planned illuminated width, not just the overall tread width. Confirm the cable route. Check landings, turns, finished surfaces and a serviceable controller/power-supply position before ordering. Main-line node spacing: the standard STEP-09 main line uses 35cm node spacing. A 40cm configuration is an additional option and must be confirmed before ordering. Installation planning before you buy Measure each treadRecord planned light width, node position and any different-sized steps separately. Map turns and landingsDo not assume a straight-run layout will fit an L-shaped or multi-landing staircase. Test sensor approach zonesPlan for the real walking direction at stair entrances and avoid placing the daylight sensor where the step lights shine directly onto it. Keep equipment accessibleAllow future access to the controller, power supply and connectors instead of sealing them permanently behind finishes. Package contents and connector quantities must match the selected step-count, color and strip-length variant. Review the current package list and instructions for your exact configuration before installation. Basic checks if the system does not behave as expected No activation: confirm power, sensor connections, approach position and current daylight-control settings. Incorrect sequence: check the configured step count, main-line order and connection at the affected node against the current manual. One step remains dark: switch power off before checking that step's plug-in connection and COB strip lead. Unexpected daytime behavior: review daylight-sensor placement and make sure it is not obstructed or illuminated directly by the stair lights. Important: STEP-09 is presented here for indoor staircase lighting. Do not infer outdoor, wet-area or waterproof suitability from the product name. Disconnect power before handling connections, follow the current product instructions and use a qualified local electrician for fixed electrical work where required. STEP-09 frequently asked questions Does STEP-09 have smartphone App control? No. STEP-09 uses motion sensing and remote control. If Bluetooth App control is essential, compare the MALIIGAZA STEP-P5 stair light kit. How many stairs can STEP-09 control? Current complete-kit variants cover 5–28 illuminated steps. Choose the exact variant that matches your project. Are 3000K, 4000K and 6000K adjustable in one kit? No. They are separate fixed-color options: 3000K warm white, 4000K natural white and 6000K cold white. Should I choose 1m or 1.2m COB strips? Choose according to the planned illuminated width on each tread. Measure the usable mounting area and confirm that all steps can use the selected length before ordering. What is the difference between the 35cm and 40cm main line? The standard main line has 35cm node spacing. The 40cm version is an additional configuration that must be confirmed before ordering; select it only when your measured route requires it. Does STEP-09 include aluminum profiles? No. MALIIGAZA stair-light kits do not include aluminum profiles. The COB strip itself provides a continuous, dot-free line of light. Can STEP-09 be used on a staircase with a landing or turn? Potentially, but fit depends on the actual cable route, node spacing and access around the landing. Measure each section separately and confirm the layout before ordering. Is STEP-09 designed for outdoor stairs? This page presents STEP-09 as an indoor staircase-lighting system. Outdoor or wet-area suitability is not claimed. Does the daylight sensor mean the lights never turn on during the day? Daylight response depends on the current settings and sensor placement. Follow the current instructions and test the sensor in the actual stairwell lighting conditions. Which MALIIGAZA kit should I choose if I need a wireless wall switch? Compare the STEP-07 stair light kit, which is positioned around wireless wall-switch control and a dedicated always-on mode. Last reviewed: August 23, 2026. This information reflects the current listed STEP-09 configurations. Package contents and availability follow the exact variant selected and the latest product instructions. Plan before installation For measurement, cable-route and installation planning, read How to Install LED Stair Lights, Where to Mount LED Strips on Stair Treads and Risers and Common DIY Stair-Light Installation Mistakes. Ready to configure STEP-09? Select the exact step count, fixed white color and strip length above. If the main-line route is uncertain, compare the wider MALIIGAZA stair-lighting range first. Compare Stair Lighting Kits Show more