GoGoNano EcoCare sanitary protector is designed for interior and bathroom surfaces. The nano coating enhances hygiene and reduces dirt adhesion on various surfaces, including glossy, matte, and non-slip materials. EcoCare bathroom protector is suitable for smooth, rough, natural, and plastic surfaces in sanitary areas. Ecofriendly and natural ingredients. Completely safe for the environment, health and materials. Ensures long-term hygiene and a clean appearance on all interior and sanitary surfaces. Easy to use and immediate results. Suitable for most materials: smooth, rough, natural and plastic surfaces. EcoCare is incredibly simple to use. To achieve the best results, we recommend shaking the bottle and cleaning the surfaces with EcoClean stain remover before using the protector. To achieve the best results, the protective agent should only be used on previously cleaned or clean surfaces. Then, using a soft microfiber cloth, apply the product directly to the surface. Allow the protective agent to work for about 10-15 minutes. After that, use a microfiber cloth or household paper to remove the residue from the treated surface.The product is meant to be used on a regular basis. There is no reason to repeat the process before three months have passed.Correct dosing of the protective agent is also important. If you use too little EcoCare bathroom protector, it may not do its job well enough. However, too much can cause unwanted drips and residue. You will achieve good efficiency if you use about 10 ml / m2.Use EcoCare nano interior & sanitary protection agent: In the bathroom, on the sink, wall tiles, floor tiles, water closet In the kitchen, on work surfaces, sinks, floor and wall tiles On the dining table, sofa table, children’s desk In the hall closet, on the shelves On doors, as well as around handles or knobs On all other hard surfaces except glass surfaces that are frequently used or dirty. Safety: Not a hazard product. Keep out of reach of children. Consumption: About 10 ml / m2.
