Brand: Intermatic | Manufacturer Part Number: AG3000 | Big Frog Supply SKU: AG3000 Product Overview The Intermatic AG3000 is a hard-wired surge protective device designed for 120/240 VAC single-phase HVAC equipment, distribution panels, and service-entrance applications. It can be installed as a Type 1 or Type 2 surge protector in an approved electrical system and provides three modes of protection across line-to-neutral and line-to-line connections. The device uses TPMOV surge protection technology and is rated for a maximum surge current of 50 kA per phase. Two status indicators make the protection condition easier to check during routine service. A green light indicates normal operation, while a red indication means protection has diminished and the unit should be replaced. The UV-resistant, watertight Type 4X plastic enclosure supports properly installed indoor or outdoor applications. The AG3000 is a protective component only; it cannot eliminate every possible electrical event and must be installed with the correct conductor routing, overcurrent protection, grounding, and equipment connections. Key Features Type 1 or Type 2 hard-wired surge protective device 120/240 VAC single-phase operation Three protection modes: L1-N, L2-N, and L1-L2 50 kA maximum surge current rating per phase TPMOV surge protection technology Green and red status indicators UV-resistant Type 4X plastic enclosure ANSI/UL 1449 5th Edition certification Common Uses HVAC condenser and heat-pump protection Residential distribution panels Service-entrance surge protection Outdoor electrical equipment within approved installation requirements Technical Specifications Voltage: 120/240 VAC, single phase Surge protection type: Type 1 or Type 2 Maximum surge current: 50 kA per phase Nominal discharge current: 20 kA Short-circuit current rating: 100 kA Enclosure: Type 4X plastic Wiring: Wire leads Dimensions Height: 3.875 inches Width: 1.625 inches Depth: 4.188 inches Installation Notes Installation requires work at line voltage and should be performed by a qualified electrician. Disconnect and verify power is off, follow the Intermatic wiring instructions, keep conductors as short and direct as permitted, and confirm the electrical system, grounding, and installation location are compatible with the device. Frequently Asked Questions Can the AG3000 be installed outdoors? Yes, when installed according to Intermatic instructions. It uses a UV-resistant Type 4X enclosure. What do the indicator lights mean? Green indicates normal protection. A red indication means protection has diminished and the device should be replaced. Does it protect both legs of a 120/240-volt system? Yes. It provides L1-N, L2-N, and L1-L2 protection modes. Why Buy This Product from Big Frog Supply? The AG3000 is a model-specific surge protector whose voltage, protection type, current rating, and enclosure classification all matter. Big Frog Supply presents those verified details clearly so customers and installers can confirm the correct Intermatic device before ordering.
Related
Related
Related
Related