iPhone 14 Pro Max Camera Flash Light Flex Cable PULL-A Replacement True Tone LED Torch Repair Part

JPC MOBILE ACCESSORIES Verified independent store

→

PULL-A Genuine Pulled · True Tone Flash · 12-Month Warranty iPhone 14 Pro Max Camera Flash Light Flex Cable — PULL-A Genuine Pulled, True Tone Dual-LED Torch Repair Part PULL-A gra de rear camera flash flex cable for iPhone 14 Pro Max. Fixes a dead flashlight, broken torch, or non-firing True Tone flash. Pulled from genuine working donor iPhones — original Apple componentry. Includes the dual-LED True Tone module. The full flex tail runs to the logic board connector. Fits A2894 global, A2651 US, A2893 Canada/Japan, A2895 China models. Restores camera flash, video light, torch, and Adaptive True Tone white-balance pairing. Bench tested for LED brightness and connector integrity before dispatch. Backed by a 12-month warranty against component failure. Genuine pulled flex — not a generic clone or reprint. PULL-A Genuine Pulled True Tone Dual-LED Bench Tested 12-Month Warranty All 4 A-Numbers AU-Wide Tracked Bench Inspected Ships 2-4 Days Fixes These iPhone 14 Pro Max Flash Symptoms Got these iPhone 14 Pro Max flash problems? This flex is the fix. Torch Won't Turn On Control Centre torch button does nothing. Camera Flash Dead Photo flash will not fire on shutter. Only One LED Lights One half of the dual-LED has failed. Flash Stays On Stuck-on torch that won't turn off. Backed By A 12-Month Warranty Vendor-confirmed 12-month warranty against component failure. Buy with full confidence on the bench. Brisbane Technical Hub Stocked and dispatched from Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. Real local repair parts. Authenticity Guaranteed Genuine PULL-A pulled flex only. No clones, no reprinted parts swapped into the order. Reliable Dispatch Ships in 2-4 business days from Forest Lake via Australia Post tracked. Anti-static packed. Why PULL-A Swap-Test Install Notes Tools Needed Specifications Compatibility FAQs Why PULL-A Beats Aftermarket Clones PULL-A means pulled from working donor iPhones — original Apple parts. Original Apple Componentry Same LED chips and flex material as the factory part. True Tone Pairing Works Warm and cool LED pair fires correctly with iOS auto-balance. Connector Integrity Original board-to-board connector seats cleanly first time. Bench Tested Before Dispatch Each pulled flex powered up and brightness checked. Confirm The Flash Flex Is The Fault Run these quick triage checks before swapping the part. Restart the iPhone first — software bugs can lock the torch. Open Camera, swipe to Photo, tap the flash icon and force it on. If the flash still does not fire, software is not the issue. Try the torch from Control Centre — same dead behaviour confirms hardware. Check for water-damage marks near the rear LED housing. If wet, dry the phone fully before fitting the new flex. If only one LED lights, the warm or cool diode has failed. If both LEDs are dead, the flex tail or connector has failed. Professional Installation Strongly Recommended Installing this flex requires opening the iPhone 14 Pro Max. Battery must be disconnected first to avoid short circuits. Display removal is needed to reach the rear flash flex routing. Pentalobe screws and tri-point screws are used inside the device. The flex connector is small and easy to damage when seating. Anti-static handling is needed during the entire swap. Difficulty rating: moderate to high — repair-shop level work. If unsure, book the part in for a workshop fitting. Tools Needed For The Swap Standard iPhone repair-shop tools — kits available in store. Pentalobe Screwdriver For the two bottom-edge screws. Tri-Point Y000 Driver For internal Apple tri-point screws. Phillips Driver For shield bracket screws inside. Plastic Spudger For lifting flex connectors safely. Suction Cup For lifting the OLED display panel. Anti-Static Mat For safe board and flex handling. Full Specifications Part Type Camera Flash Light Flex Cable Grade PULL-A (Pulled From Donor) Compatible Phone iPhone 14 Pro Max ONLY Buyer Use Case Repair Shops, Mobile Techs, DIY A2894 Global / Australia / Europe A2651 United States Model A2893 Canada / Japan / Korea Model A2895 China Mainland Model Phone Release September 2022 (Apple) Position Rear, Top-Left Camera Array Flash Type Adaptive True Tone Dual-LED LED Count 2 (Warm + Cool Pair) Doubles As Torch / Flashlight / Video Light Includes LED Module + Flex + Connector Connector Type Apple Board-To-Board Source Pulled From Working Donors Quality Check Bench Tested Pre-Dispatch Install Difficulty Moderate To High (Pro Level) Display Removal Required For Internal Access Battery Disconnect Required Before Swap Anti-Static Required For Handling Quantity 1 Flex Cable Per Order Packaging Anti-Static Sealed Sleeve Warranty 12-Month Vendor-Confirmed Dispatch 2-4 Business Days Shipping Australia Post Tracked Pickup Forest Lake Brisbane Compatibility — iPhone 14 Pro Max Only Fits These A-Numbers A2894 A2651 A2893 A2895 All four iPhone 14 Pro Max regional models share this rear flash flex. Does NOT Fit These Models iPhone 14 Pro — smaller 6.1-inch body, different flex routing. iPhone 14 and 14 Plus — dual-camera rear, different flash housing. iPhone 13 Pro Max — same shell but different internal layout. iPhone 15 Pro Max — titanium frame, different flex pinout. iPhone 16 Pro Max and 17 Pro Max — larger body, different cable. iPhone 12 Pro Max and earlier — old chassis design entirely. Open Settings, General, About, Model Number to confirm A-number. PULL-A Pulled vs Cheap Aftermarket Clone This PULL-A Flash Flex Genuine Pulled Apple Componentry Pulled from working donor iPhone 14 Pro Max units. True Tone warm-and-cool LED pair fires correctly. Original board-to-board connector seats first time. 12-month warranty against component failure. Cheap Aftermarket Clone Generic Reprinted Flex Generic LEDs often run a wrong colour temperature. True Tone pairing may misfire or run uneven brightness. Cheap connectors lift, bend, or short on first seat. Often no warranty cover and no bench testing. Visit Us In Forest Lake, Brisbane Repair shops welcome — drop in for trade pickup or bench fitting. Brisbane Technical Hub Authenticity Guaranteed Reliable Dispatch Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 Fast Australia-wide Shipping Dispatch: Ships within 2-4 business days from Forest Lake. Brisbane Metro: 1-3 business days after dispatch. Sydney and Melbourne: 3-5 business days after dispatch. Perth and Regional: 5-8 business days after dispatch. Tracking: Australia Post tracking included on all orders. Pickup: Local pickup from the Forest Lake store. Pay your way — Afterpay and Klarna available at checkout. Frequently Asked Questions My iPhone 14 Pro Max torch will not turn on — is this the fix?+ Most likely yes — the torch and rear flash share this same flex. First restart the phone to rule out a software glitch. If both torch and camera flash stay dead, swap this flex. Will this fit my iPhone 14 Pro Max?+ Yes — fits all four 14 Pro Max regional models. A2894 global, A2651 US, A2893 Canada/Japan, A2895 China. Confirm in Settings, General, About, Model Number. What does PULL-A actually mean?+ PULL-A means pulled from a working donor iPhone 14 Pro Max. The flex is original Apple componentry — not a clone or reprint. It is the highest aftermarket tier available for this part. Will it fit my iPhone 14 Pro or 14 Plus?+ No — both have a different rear flash flex layout. 14 Pro is smaller at 6.1-inch with shorter flex routing. 14 Plus has a dual-camera rear with a different flash housing. Does the True Tone flash work after the swap?+ Yes — the warm and cool LED pair fires correctly. iOS auto-balances flash colour to match ambient light. PULL-A componentry preserves the True Tone behaviour. How hard is the install?+ Moderate to high difficulty — repair-shop level work. Requires display removal and battery disconnect first. Book the part in for workshop fitting if unsure. What if only one of the two LEDs is dead?+ A single dead LED still needs the full flex swapped. Individual diodes cannot be reflowed back to life on this assembly. Swap the whole flex to restore True Tone behaviour. Is there a warranty on this part?+ Yes — 12-month warranty against component failure. Covers dead-on-arrival and early flex faults. Install damage and water exposure are not covered. Will the camera still focus and shoot photos?+ Yes — this flex is only the flash assembly. It does not affect autofocus, sensor, or lens behaviour. Only the flash, torch, and video light are restored. Do you offer trade pricing for repair shops?+ Yes — repair shops can open a trade account with us. Visit Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078 to set up. Bulk PULL-A parts ordering available for ongoing tickets. Browse Related Categories Repair Tools Samsung Screen Protectors Samsung Phone Cases PULL-A Genuine · True Tone Dual-LED · 12-Month Warranty The JPC Mobile Quality Seal Every PULL-A flash flex is bench tested before dispatch. Address: Shop 3A, 152 Woogaroo St, Forest Lake QLD 4078. LED brightness, True Tone pairing, and connector seat all verified. Brisbane Bench Tested 12-Month Warranty Genuine PULL-A Pulled Show more