The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers. This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-compatibility, but adding the new functionality. Compatible Sliprings iPower Gimbal Motor Slipring - OD 6.5mm Specifications: Model: GM2804 Motor Out Diameter: Ф35±0.05mm Configuration: 12N/14P Motor Height: 15±0.2mm Hollow Shaft(OD): Ф8-0.008/-0.012 mm Hollow Shaft(ID): Ф6.5+0.05/0 mm Wire Length: 60±3mm Cable AWG: #24 Motor Weight: 42.3±0.2g Wire plug: PH3P connector No-load current: 0.09±0.05 A No-load volts: 10V No-load Rpm: 1602~1771 RPM Load current: 0.8A Load volts: 10V Load torque(g·cm): 250-350 Motor internal resistance: 9Ω±5%（Resistance varies with temperature） High voltage test: DC500V 1mA @2sec Rotor housing runout: ≤0.1mm Steering (axle extension): clockwise High-low temperature test: High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Maximum power: ≤25W Working current: 2-3S Working temperature: -20~60℃;10~90%RH Packing List: 1 x iPower GM2804H-100T Gimbal Motor
