GM3506 Gimbal motor with Encoder AS5048A The GM35 series motor by iPower Motors is the ultimate brushless gimbal motor for SLR and similar weight Cameras. This motor is designed for large-scale multi-rotor platforms looking to lift SLR sized gear – 1.5KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo. Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency. Features Easy to do gimbal tuning, no need to do much calibration work any more. Power saving, 5 times long working time than gimbal without encoder system. Twin IMUs. Faster response, motor torque increasing instantly, no bug for difficult rotating angle any more. Encoder chip AS5048A Compatible Sliprings Currently none available Specifications Model: GM3506 Motor Out Diameter: Ф40±0.05mm Configuration: 24N/22P Motor Height: 25.8±0.2mm (Included with Encoder housing) Hollow Shaft(OD): Ф12-0.008/-0.012 mm Hollow Shaft(ID): Ф8.6+0.05/0 mm Wire Length: 610±3mm Cable AWG: #24 Motor Weight: 72±0.2g Wire plug: 2.5mm dupont connector No-load current: 0.17±0.05 A No-load volts: 16V No-load Rpm: 2149~2375 RPM Load current: 1A Load volts: 12V Load torque(g·cm): 600-1000 Motor internal resistance: 5.6Ω±5%（Resistance varies with temperature） High voltage test: DC500V 1mA @2sec Rotor housing runout: ≤0.1mm Steering (axle extension): clockwise High-low temperature test: High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Maximum power: ≤25W Working current: 2-3S Working temperature: -20~60℃;10~90%RH Packing List 1 x iPower GM3506 Gimbal Motor 1 x AS5048A Encoder with aluminum case
Related
Related
Related
Related