Timbabuild EHB60 Epoxy Wood Repair Compound – High-Build Structural Timber Restoration Timbabuild® EHB60 rebuilds large areas of decayed structures quickly and effectively. By removing the rotten wood, priming the surface, and then building up and moulding the surface, similar to a putty consistency, the hardened epoxy can be sanded or planed exactly like wood to provide the perfect finish. It provides a physical and chemical bond which is stronger than the original wood. Technical & Handling Notes EHB60 is a two-part system; mixing ratio must be followed precisely for effective cure and strength. Apply only on timber that has first been stabilised with EWS primer and is dry. Once placed and cured, the epoxy repair can be sanded, drilled, shaped or painted as timber. Suitable for interior or exterior use when properly finished and sealed. Always follow health & safety guidelines when working with epoxy systems — gloves, ventilation, protective masks recommended. Features Two-Part High-Build Epoxy – provides deep build-up for structural strength on damaged timber sections. Excellent Adhesion & Bond Strength – bonds securely to well-prepared, EWS-primed wood, even on soft or weathered timber. Sculptable, Sandable & Shapeable After Cure – once cured, EHB60 can be shaped, drilled, sanded, planed or cut like original wood. Moisture-Resistant & Durable – suitable for interior and exterior repairs when properly primed and sealed. Versatile Application – suitable for structural beams, window/door frames, weatherboards, cladding, fascia boards, skirtings, trims, and joinery. Compatible with Standard Finishing Systems – accepts paints, stains, varnishes and sealers for seamless integration with existing timber finish. May be coloured with any oil based colourant. No slump, shrinking or cracking - water resistant. VOC A+ & LEED Approved Applications Structural repair of beams, rafters, joists or posts with rot or damage. Rebuilding window sills, door frames, thresholds, and external joinery damaged by moisture or decay. Restoration of cladding, weatherboards, fascia, and exterior trim on heritage, residential or commercial buildings. Replacing damaged sections in skirtings, architraves, mouldings, and decorative timber work. Any timber renovation or repair job where restored strength and load-bearing capacity is required. Technical Specs Working Time 30mins at 20°C Curing Time 4hr at 20°C Repair Size up to 60mm Application Temperature +5°C to +30°C Video Downloads Timbabuild Application Process
