DYNAMIX 4-2 Hidden IR Distribution System. Kit includes 1x IR Box with RJ45 Port, 1x 1M RJ45 IR Rec Emitter, 1x 2M IR Blaster, 1x AU Power Adapter The IR6000 System is a modular infrared extension system and the components required are available individually. This system can be used universally and is suitable for just about any situation. You can extend the IR (infrared) signals of remote controls. It makes sure that all your AV components receive the commands sent from your existing IR remote controls. You can keep all your devices behind in closed cabinets but still keep them in use with this device. Simply place the hidden IR repeater box in the cabinet or closet, affix it to the included IR emitters/IR blaster, then place a receiver somewhere near your television and the system will let you control up to numerous individual home theatre components using your existing IR remote control. Includes 1x Hidden IR Repeater Box 1x RJ45 IR Receiver 1x Stereo IR Receiver 2x Dual IR Emitters 1x IR Blaster 1x AU Power Adapter Specifications IR Module Power Supply DC12V/250mA, supplied from connected IR6000 box IR Input 1x 3.5mm jack connector for IRCV-3 Receiver (3 conductor plug) 1x 3.5mm jack connector for IR-CV-4 receiver (4 conductor plug) IR Emitter Output 4x 3.5mm jack connector for IR-EM-3 Emitter 1x 2.5mm jack connector for IR-Baster RJ45 Port Extra RJ45 IR Receiver can be connected to this input or you can use the cat cable together with the RJ45 IR Receiver to extend the IR signal reception Status Indication Green LED for On/Off indication IR Signal Indication Blue indication LED Power Indication Red indication LED Dimensions 55 x 85 x 23mm IR Receiver (IR-CV-4, IR-CV-5) Frequency Range 25 ~ 60KHz IR Reception Range ±10m Status Indication Green LED for system On/Off indication IR Signal Indication Blue indication LED IR Reception Angle 90º (+45º/-45º from center) IR Receiver Connection 1x 3.5mm jack plug (4 conductor plug), 1x RJ45 connector Cable Length 1x 2m (IR-CV-4), 1x 1m (IR-CV-5) extendable up to max 100m Dimensions 25 x 14 x 9mm IR Emitter (IR-EM-3) Connection 3.5m jack plug (mono) IR LEDs 2x IR emitter LEDs Cable Length 2m Peak Forward Current 100mA Forward Voltage Max 1.5V Peak Wavelength 940nm Dimensions 22 x 16 x 8mm Power Adapter Input AC 100 ~ 240V Output DC 12V/250mA DC Plug 5.5 x 2.1mm IR Blaster Connection 2.5mm jack plug (mono) IR LEDs 1x IR blaster LED Cable Length 2m IR Transmitting Range 1m IR Transmitting Angle 90° (+45°/-45° from center)
