Provides isolation from AC line when servicing hot chassis, it has a 1.5m long AC cord & the output jack is grounded. Unit is fused with a spare. It has an LED light indicator for On/Off. 120VAC in, 1000VA capable with one output. The unit has a wire wound primary and secondary with equal turns ratio. It also has a DC circuit breaker. If the unit is overloaded, remove the load, reset the breaker, wait for 5 mins then resume under normal load. An isolation transformer is designed to provide electrical isolation between the input and output circuits, typically by using a transformer with a 1:1 ratio. This isolation helps to prevent electrical noise, including RF power noise, from traveling between circuits. When RF power noise is present in an electrical system, it can cause interference and disrupt the operation of electronic devices, such as computers, televisions, and radios. By using an isolation transformer, this noise can be filtered out, resulting in a cleaner electrical signal. However, it's important to note that while an isolation transformer can help reduce RF power noise, it may not be effective in all situations. The effectiveness of an isolation transformer will depend on the specific source and characteristics of the noise, as well as the design and quality of the transformer itself.
