Features and Benefits· Integral 7 day programmable timer· Programmable filter change indicator· Electronic temperature control, programmable between 80°C - 98°C· Comprehensive diagnostics systemInstallationAs per instructions suppliedPlumbingDesigned for direct connection to a potable cold water supply using the fittings supplied. An isolating valve should be installed between the supply and the heater. These wall mounted boilers have a choice of connection through rear or from beneath and require 2 bar incoming water pressure.ElectricalTo be connected to 230 volt 13 amp or 30 amp (6kW) supply.ConstructionStainless steel or impact resistant thermoplastic case.Stainless steel heating chamber.Low voltage switching.2 safety cut-outs.ApprovalsWRAS approved.SpecificationDimension: Height 414 Width 314 Depth 215 (mm)Tap Depth: 90 (mm)Power loading: 3 (kW)Heat-up time: 11 minutesRecovery Rate: 0.5 (Litres)Rapid Draw-Off: 3 (Litres)Rapid Draw-Off: 18 (Cups)Rapid Draw-Off: 168 (Cups)Hourly Output: 28 (Litres)Stand by Loss: 0.1 (kW/h)* Based on 6 Cups Per Litre