Sometimes there's just no place in the shower to put your jar of Simple Sugars or Smooth For Men and, well it's just annoying! We get that. So we fixed it. Introducing the Simple Sugars jar holder! It sticks to the wall of your shower, holds your jar and even has a handy little spot for the spoon! We think these things are amazing and hope you will too. They come in both sizes in Simple Sugars Pink or Smooth For Men Black. This is the best enhancement to the NO-LO experience since the flip-top lid ;) Be sure to order the correct size for your jar - Foot and Facial products are always 5oz, Body products are available in both 5oz and 8oz sizes. IMPORTANT INSTRUCTIONS FOR INSTALLATION TO MAKE SURE THAT YOUR JAR HOLDER STAYS IN PLACE: Rinse the suction cup with water to remove any potential debris from packaging. Allow to air dry. Make sure the the suction cup and jar holder are fully engaged. (The suction cup should be pushed into the slot as far as it can go.) Thoroughly clean the surface where you want to install your jar holder. Any residue may interfere with the integrity of the seal and could break the suction, Make sure you are applying to a perfectly flat non-porous surface for best results. Glass is ideal. Tile is not recommended. Moisten the back of the suction cup. Make sure that the suction cup is perfectly flat when installed (no air bubbles). This means that the seal is fully engaged. It should not be able to be disengaged unless you pull up the small tab to break the suction seal. If you are leaving your jar in the holder while stirring and dispensing the product, make sure that you check that the suction cup is securely engaged with the holder (see #2) before and after each use. Any downward pressure that you might apply to the jar while stirring or dispensing could cause the suction cup to disengage. Since there are so many variables involved, and we have no way to ensure that these instructions are being properly followed, we can't accept responsibility for product spills that result from a suction cup failure. We have thoroughly tested these holders however, and can assure you that if installed and handled properly your product will stay securely and conveniently in the holder.
