Introducing our premium UV-DTF cup decals designed acrylic, stainless steel tumblers, (does not include tumbler). 🚨 The longevity of your decal depends on the care it receives. - Gentle hand wash in warm soapy water is suggested. Exclusive decal designs are NOT to be re-sold in anyway. Eg: live wrap sales or website sales. KEY FEATURES: 🌟 Waterproof (not recommended for dishwasher) 🌟Scratch proof 🌟 Ideal for smooth, hard surfaces such as glass, metal, acrylic and select powder-coated surfaces. We suggest to apply additional pressure during the rubbing down process during application. APPLICATION PROCESS: - Thoroughly clean your surface with a clean cloth and allow to fully dry. - Centre the decal on the tumbler and remove the backing. - Once centred, apply a piece of tape at the top and the bottom of the decal sticking to the tumbler to make sure the decal stays in place. - Remove the tape pieces and using a squeegee, rub down the design. Go slow during this process to minimise air bubbles in your wrap. - Rub down your design for approx 2 minutes using your hands or fingers, the heat from your hands or fingers will allow the adhesive to stick a lot better. - Remove transfer sheet carefully. - Allow to sit for minimum 48 hours before use to allow adhesive to stick and minimise premature lifting. 🚨 Please adhere to these instructions as UV-DTF prints are ineligible for replacement or refund. CARE INSTRUCTIONS: 🌟 Hand wash ONLY. 🌟 AVOID hard scrubbing or use of abrasive chemicals. 🌟 while UV-DTF prints do have exceptional strength and durability, excessive wear and tear or rough handling may lead to scratches and/or chipping.
