Description: This design is an updated version of classic straight-leg jeans, as the side seam slants inwards towards the shin, where there is also a small dart by the knee, which helps to create a trendy, barrel-like silhouette – though without it being too much. The waistband is curved and sits just below the navel. The fit around the waist and hip is on the tight side, since it is expected that the denim fabric will stretch with wear. All inner seams are made as proper flat-felled seams, which ensures a very durable pair of jeans with a nice finish. Pro tip: check out my blog post about finding the right back crotch curve for jeans Hassel - I'll show you how to change the fit from a "mom-fit" to a classic pair of jeans! Read the blog post right here Recommended fabric: Choose a medium weight durable denim between 10-13 oz (340-440 gsm). The denim can be without stretch or a moderate amount of stretch between 1-3%. If you use a very stretchy denim it could be an idea to size down. The fabric can be made of natural fibers (e.g. cotton, viscose, linen etc.) or a mix between natural and synthetic fibers (polyester, nylon, elastane, lycra). A general rule of thumb is: the higher the fabric weight (oz) the more sturdy the jeans. Unsuitable fabric: All jersey (knitted) fabric types as well as thin or delicate fabrics. Estimated time required: 7-12 hours Degree of difficulty: 4/5 Classification of degrees of difficulty: Beginner friendly: No zips, buttons, fusible materials or difficult techniques Manageable: Introduction to new techniques everybody can learn Moderate: pre-existing knowledge of sewing is recommended. Focus on finishes Difficult: Confidence with sewing is essential Advanced: Focus on techniques, precision work and details Video guide:
