60kg kits available at $530. Please WhatsApp us at 90112628 for 60kg kits or if you need to purchase more than what is listed here. Jesmonite AC730 is a water-based microcement that can be smooth or textured with a stone-like finish. It is highly durable, perfect for creating homeware, furniture, architectural features and more. It is suitable for indoor and outdoor use. The system is designed for glass reinforced decorative structures, and can also be used for small castings (see Technical Data sheet). The product contains a fine decorative aggregate and powder pigments, carefully controlled to give a consistent decorative surface finish after treatment with a proprietary brick cleaner or acid etch. It is supplied as two components, a water-based acrylic liquid, and a blended powder, with a mix ratio of 5:1 (Powder to Liquid). Jesmonite liquid and powder are best mixed with our high-shear mixing blade (fixed onto a hand drill). Mixing Jesmonite with a blade will help to reduce the formation of air bubbles and ensure that the mix is smooth and free from lumps. You have a working time of approximately 20 minutes, depending on size and complexity, the cast should be left in the mould for a further 2½ – 3½ hours and achieves over 90% of its ultimate strength in the first 24 hours. As AC730 has a thick texture, we recommend adding a small amount of Super Plasticiser to the mixture to lower its viscosity and increase its flowability. This would also make it easier to pour or brush onto moulds. You may extend your working time by adding a small amount of Jesmonite retarder (for AC730) to the mixture. Etching is recommended to expose the fine decorative aggregates on the cementitious surface. You may use our hydrochloric acid to do so. The acid removes the cement rich film from the surface of objects moulded in AC730 to produce a stone finish. When diluted with water it can also be used as a cleaner for removing marks from AC730. AC730 is available in eight stone finishes: Old Terracotta, Yellow Sandstone, Bathstone, Portland Stone, Natural Stone, White Marble, Charcoal Black and Silver Grey Granite. We recommend sealing and waterproofing your Jesmonite artworks with our non-toxic food grade beeswax sealer, especially if you are planning to use them as coasters. You can also use Jesmonite's Flexiguard sealer. You may get our thick silicone moulds specially designed for casting Jesmonite coasters. Please take note that you will need a weighing scale to accurately measure the amount of Jesmonite you need to use, which is not included in the kit. Please refer to this user guide for tips on working with AC730. Products benefits Superior cast and glass reinforced mouldings Solvent free & no VOCs Fire resistant Lightweight Impact resistant Information Shrinkage compensated material of low permeability. Durable in all conditions of external weathering including water features. Reduced free-lime content, with low alkalinity, leading to major reductions in efflorescence in comparison with ordinary Portland cement systems. Contains a fine decorative aggregate and powder pigments, carefully controlled to give a consistent decorative surface finish after treatment with a proprietary brick cleaner or acid etch. Please take note that you will need a weighing scale to accurately measure the amount of Jesmonite you need to use, which is not included in the kit. View this post on Instagram A post shared by Resin Play (Singapore) (@resinplay.sg) Useful Guides & Technical Data Sheet JESMONITE AC730 LEAFLET JESMONITE AC730 USER GUIDE JESMONITE AC730 TDS JESMONITE AC730 SDS
