JETBeam BC40SELots of UpgradesJETBeam has been making upgrades all across their lines of flashlights. Next up to receive a makeover is the BC40SE, which was already a beast of a light. JETBeam has gone ahead and upgraded the XM-L2 LED to push out more lumens and a longer run time in High mode, which means a brighter light intensity. Also, they've added a power indicator just below the head, so you can manage your time and not be left in the dark. Quite a change has been made to the body of the light, giving you a much better grip with in hand. An added anti-roll tactical ring makes sure it doesn't roll around and fall off of any surface. The new "U-shaped" tail switch design prevents accidental activation. All in all, it looks like JETBeam has improved upon the original BC40 in all the right places. Lighting TechnologyCREE XM-L2 LEDJETBeam has pushed the CREE XM-L2 LED to emit an extra 80 lumens, putting you at 980 lumens, while in High mode. They were able to extend the run time from 1.5 hours to 3 hours in High mode. The Low mode has been increased from 115 lumens to 200 lumens. Now that is a nice jump in brightness. You still get the 350 meter beam distance with the BC40SE, which is about the length of just under four football fields. The high efficiency, digitally regulated output circuit maximizes the power usage and controls the heating. PowerA Variety of OptionsPowering the BC40SE is either four CR123A/RCR123A batteries or two 18650 cells. You don't have to worry about inserting the batteries the wrong way, as there is reverse polarity protection. New to the BC40SE is a power indicator, which is necessary if you are out camping or in the field. Keep a couple extra batteries on you so you are good to go. The BC40SE is waterproof to IPX-8 standards meaning you can dunk the light under water up to 2 meters for 30 minutes with no damage to the batteries or the light. Features: Remaining power indicator Digitally-regulated output maintains constant brightness Reverse polarity protection to protect from improper battery installation Over-heat protection circuit Anti-roll, slip-resistant body design Made of durable aircraft-grade aluminum Premium Type III hard-anodized anti-abrasive finish Waterproof to IPX-8 (under water 2 meters for 30 minutes) Impact resistant up to 1.5 meters Included Accessories: tactical cigar ring, lanyard, rubber tail cap switch cover, and spare O-rings Specifications: LED: CREE XM-L2 LED Runs on: 4x CR123A/RCR123A or 2x 18650 (Batteries not included) Output mode/Runtime : High: 980 lumens / 3.9hrs Mid: 200 lumens / 8.4hrs Peak Beam Intensity: 31000cd Max Beam Distance: 350meters Dimensions: Length: 8.9" (226.8mm) Bezel Diameter: 1.9" (48.5mm) Body Diameter: 1" (25.4mm) Weight: 7.58 oz (215g) (excluding batteries)
