Jewelry Shape Template - Ring Sizes - Half Our special surface makes it easy to find these templates on your workbench, but allows clarity for positioning.This template, along with the Hollow Rings template and the Ring Shank Template is all you will need to create hollow rings quickly and easily. Start with the Hollow Ring Template by cutting out the side pieces and the ring size. Once these pieces are dry, cut the ring shank and paste the pieces together with glue or water. View the video and project guide below for an idea of how this template can be used. Use our Ultra Clay Pick for best results! Use to create the opening for a ring that is half sizes from 4 to 15. Made in the USA Product Tips To use the template on polymer, metal or ceramic clay, place a plain or textured slab on a Tuff Card or other work surface. You can safely rest your fingers on the template to hold it in place. Cut out the shape with our Ultra Clay Pick or a very fine needle tool. Start at the outside corners and cut to the inside corners for the cleanest cuts. Remove the template and lift away the excess clay.For use on sheet metal, use a Scotchbrite pad to give the surface a soft satin finish, then use a scribe to scratch the shape onto metal. China white can also be used to paint on a white surface, or another method is to cover the metal surface with a label, then trace the shape with a sharpie. It's easier to see it this way and helps with more accurate cutting.
