This little box of magic takes your input signal and splits it into two always-on outputs that are buffered so you don't lose clarity or tone in any way. Need to split your signal? Don’t want to settle for a passive device that will kill your tone and cause signal loss? This is what you need! This little box of magic takes your input signal and splits it into two always-on outputs that are buffered so you don’t lose clarity or tone in any way. There are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you’ve ever split your guitar’s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back. Here are some of the uses: *Plug your guitar in and use one output to send your clean signal somewhere like a mixer, separate amp, etc... and send the other output through your board like normal. *Use one output to send a constant signal to your tuner and the other for your normal chain. This can help you defeat those volume pedal “tuner out” horrors! *Split your signal in any way you can imagine! This pedal requires standard 9V DC Negative power, consumes less than 100mA, and measures 3.6"x1.5"x1"
