Yes, that's right! We have a Jim Kelley Single Channel 1x12 Combo in stock now. The Jim Kelley Single-Channel amplifier is designed to retain your guitars natural tonal characteristics in a 60 watt all-tube package while still delivering a broad range of punchy, high powered clean and smooth dynamic overdrive. Featuring a versatile pre-amp / power-amp, active shelving tone controls, reverb, and the ability to switch to half power, the Jim Kelley Single-Channel is sure to deliver any tone you need and more. Front Panel: Power Select Switch: 30 Watts for operation at half power OFF: Power is switched off 60 Watts for operation at full power Gain: Acts as an overdrive and a volume control. Adds harmonic sustain, richness and depth when at higher gain settings. (Pulling activates Presence) Treble: Adjusts the boost and cut of treble frequencies. (Pulling activates Bright) Bass: Adjusts the boost and cut of bass frequencies. (Pulling activates Mid-Boost) Reverb: Adjusts the amount of reverb introduced into the signal. Presence (Pull Gain): Located on the Gain control, this adds high frequencies by alternating the power section's negative feedback. Bright (Pull Treble): Located on the Treble control, this provides an additional boost of treble for a glassy edge. Mid-Boost (Pull Bass): Located on the Bass control, this adds thickness and sustain for "fattening up" lead tones. Inputs: HI input is for guitars that use passive or high impedance pickups and the LO input is for guitars with active or low impedance pickups. Rear Panel Boost: Footswitchable Post-EQ boost in gain to the output section to increase saturation while keeping the pre-amp clean and punchy. Speaker Out: 4 and 8 ohm outputs. Standby Switch: Standard function standby switch. Tubes: Power Tubes: 6V6 (x4) Preamp Tubes: 12AX7 (x3), 12AT7 (x1) Speaker: EVM-12L 12" Speaker
Related
Related
Related
Related