DESCRIPTION This TinyShield lets you add some control to your TinyDuino projects! Control your very own robot or play a video game with your TinyScreen. This TinyShield has two analog joysticks on both sides as well as two push buttons along the top to create a tiny controller for your TinyDuino. This TinyShield uses the I2C bus for communication and can safely run over the full TinyDuino voltage range.. To learn more about the TinyDuino Platform, click here TECH SPECS To see what other TinyShields this will work with or conflict with, check out the TinyShield Compatibility Matrix Built in ATtiny88 microcontroller, preprogrammed Two Analog Joysticks, 10-bit ADC reading for each axis of each joystick returned Two discrete pushbuttons TinyDuino Power Requirements Voltage: 3.0V - 5.5V Current: 5mA. Due to the low current, this board can be run using the TinyDuino coin cell option Pins Used A5/SCL - I2C Serial Clock line A4/SDA - I2C Serial Data line Dimensions 68mm x 25mm (2.68 inches x .984 inches) Max Height (from lower bottom TinyShield Connector to upper top of joysticks): 12.0 mm (0.472 inches) Weight: 5.95 grams (.21 ounces) NOTES This joystick works with the standard TinyScreen but not with the TinyScreen+. This joystick does not work TinyScreen+. Because the TinyScreen+ is a processor board, the connectors for the two board will not line up. Downloads ATtiny88 Datasheet Schematic Eagle Files Sample Arduino code LEARN To learn more about the TinyDuino Platform, click here
