K-Set is a non-corrosive, non-chloride accelerating admixture that speeds concrete setting time and boosts early strength K-Set contains no calcium chloride, avoiding the corrosive effects that chloride-based accelerators have on reinforcing steel. It's formulated for cold weather use or anywhere reduced setting time, higher early strength, and improved workability are needed. Key Features & Benefits Non-corrosive — contains no calcium chloride Accelerates cement hydration for shorter setting times and high early strength Improves workability and helps prevent segregation Aids early stiffening for mortar and stucco mixes Shortens setting times by one to three hours Helps protect against freezing by accelerating early strength gain VOC compliant; meets ASTM C494 and ASTM C270 Application Instructions Add K-Set to water, sand, or the complete mix — do not add to dry cement or let it contact other additives before entering the mortar For masonry cement, add 10-25 oz per bag depending on the degree of acceleration needed For Portland cement, add 18-46 oz per bag Determine the exact rate by testing the actual job materials Decreases water requirements by approximately 4-8% Packaging Available in 5-gallon pails (pack of 6) and 55-gallon drums. Supporting Documents Safety Data Sheet (SDS) Technical Data Sheet (TDS)
