Kegco 20" Wide Tap Stainless Steel Kegerator - K199SS-1NK

Your Outdoor Setup Starts Here Verified independent store

→

Kegco 20" Wide Tap Stainless Steel Kegerator - K199SS-1NK This Kegco K199SS-1NK Single Faucet Full-Size Beer Keg Dispenser stores your kegs in a black cabinet with an elegant stain less steel door, and comes with a single tap beer tower. Two removable wire shelves make it easy to turn this keg fridge into a regular refrigerator or beverage center when you need additional refrigerated storage space for snacks or other beverages. The 2-1/2" casters let you move this kegerator into any room in the house, so you can dispense your favorite cold kegged beer in the kitchen, bar, or dining room. Designed for optimal use in the home, this beer cooler utilizes ultra-quiet performance and an energy-efficient design. Additional helpful features include a removable drip tray that catches drips and spills for fast clean-up, a steel interior floor mat that provides long-lasting durability, and an attrdraft metal guard rail that lets you store mugs and glasses on the textured counter-top. This beer dispenser can hold one full size, straight pony, or quarter slim kegs, and up to two sixth slim, strap handle, or rubber home brew kegs. PLEASE NOTE: It will not fit bevel or rubber kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller brewing companies. Comes complete with a 1-tap keg beer dispense system that features 100% stainless steel contact Can be converted into an all-refrigerator using the 2 included adjustable shelves for additional refrigerated storage Steel interior floor mat provides long lasting durability and allows beer kegs to glide smoothly in and out Spacious interior can accommodate full-size kegs (15.5 gallon), 1/4 beer barrels (7.75 gallon), and 5 gallon kegs Stylish black cabinet with reversible stainless steel door, removable drip tray, chrome guard rail, and textured serving countertop Features MDK-199SS-01 Kegerator with Single Faucet Dispense System Includes a brand new 5 lb. Aluminum CO2 TankThis tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill. Includes Commercial Grade Dual Gauge CO2 RegulatorThe regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside of the keg. Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap ClampsThis standard length 5 foot 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design. Includes D system lever handle keg coupler that can tap all domestic kegsThis commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle. Includes a 3" Diameter Polished Stainless Steel Draft TowerThis NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. This tower is mounted using the gasket and four screws that are included. PLEASE NOTE: Coors Kegs will not fit into this Kegerator. Measures at 33"H x 20"W x 25.5"D Reversible Door the Kegco K199SS-1 Beer Dispenser comes with 2 full-width wire shelves and a hole plug which allows you to convert kegerator into a Compact Refrigerator. Includes 2 Full-width Wire Shelves Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal) Maximum Ambient Temperature: 100 degrees Fahrenheit Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature. Removable Drip Tray with Grill to Collect spills Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off Steel interior floor mat for long lasting durability and easy glide of beer keg. Textured serving counter top. 25% more energy efficient design saves you money each month UL Listed What our Experts Think Compact & Powerful: 20" width fits under counters while delivering reliable cooling performance. Stainless Steel Finish: Durable, corrosion-resistant exterior with a clean, professional look. Single Tap Convenience: Ideal for home bars, offices, or small commercial setups. Consistent Temperature Control: Keeps beer properly chilled for optimal taste and carbonation. Easy to Use: Simple controls and smooth dispensing make it beginner-friendly. Q&A Q1: What is the Kegco K199SS-1NK Kegerator?A1: A 20" wide stainless steel kegerator designed to store and dispense beer or other beverages with reliable temperature control. Q2: What materials is it made of?A2: Durable stainless steel exterior with a corrosion-resistant interior for long-lasting performance and easy cleaning. Q3: How many kegs can it hold?A3: Accommodates a standard 1/6 barrel (5-gallon) keg, ideal for home or light commercial use. Q4: Does it include a tap system?A4: Yes, includes a single-tap faucet for convenient beverage dispensing. Q5: Is temperature adjustable?A5: Yes, features an adjustable thermostat for precise beverage cooling. Q6: Can it be used built-in or freestanding?A6: Designed primarily for freestanding use; built-in use may require proper ventilation. Q7: Where can it be used?A7: Perfect for home bars, kitchens, offices, man caves, or small commercial settings. Q8: Is assembly required?A8: Minimal assembly required, including tap and keg setup. Q9: Does it include CO₂ and regulators?A9: Typically sold without CO₂ tank; compatible regulators and accessories are available separately. Maintenance Tips Clean tap lines, faucet, and drip tray regularly to ensure fresh taste and hygiene. Wipe stainless steel surfaces with a soft cloth and mild detergent; avoid abrasives. Defrost and clean the interior periodically to maintain cooling efficiency. Check door seals and hinges for a tight closure. Inspect CO₂ and gas connections for leaks or wear before use. Show more